✈✈ Free shipping on all orders ✈✈

AR-15 ''STRYKER'' Carbine Kit

-15% AR-15 ''STRYKER'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **

** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED *


AR-15 M-LOK Lightweight Frame Rail System

  • Material: Aircraft grade 6061-T6 aluminum.
  • Length: 15”
  • Internal diameter: 1.39” width 1.67 height.
  • Finish: Black Hard-coat type III Anodized.  
  • Barrel nut material:  Steel.
  • 6 screw fasteners design with proprietary screw for easy installation.
  • Inside Diameter: 1.39".
  • Spanner wrench needed to torque barrel nut to spec (not included) and hex wrench.
  • Rail comes with two 3 slots M-LOK or (1.58”).
  • 15” M-LOK location: 8 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 5 M-LOK sections/ Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the end of rail, the rest of the rail is skeleton cut with 5 M-LOK section for perfect customization.


Barrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish

  • Material: 4150 Heat Treated Steel
  • Chamber: 5.56/.223
  • Length: 16"
  • Twist Rate: 1:8
  • Gas Port: 0.750"
  • Gas System: Carbine
  • Thread Pitch: 1/2x28
  • Feed Ramps: M4
  • Finish: Parkerized
  • MADE IN USA

Birdcage Muzzle Brake

SPECS: 
Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.
Includes crush washer


AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.

  • High quality and lightweight stripped Upper Receiver
  • Material: Aircraft grade Aluminum
  • Finish: Black Anodized

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride

PROUDLY MADE IN THE USA!

Carrier

  • Machined from 8620 tool steel

  • Heat treated to military specifications

Bolt

  • Machined from 9310 tool steel

  • Heat treated to military specifications

  • Shot Peened

  • Ground to meet military required tolerances

  • MPI (Mag Particle Inspected)

Gas Key

  • Machined from 4140

  • Heat treated to military specifications

Extractor

  • Machined from 4140

  • Heat treated to military specifications

  • Shot peened

Firing Pin

  • Machined from 8640 tool steel

  • Heat treated to military specifications

  • Ground to meet military required tolerances

  • Coated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2

Cam Pin

  • Machined from 4340

  • Quench and temper heat treat

  • Ground to meet military required tolerances


Charging Handle

  • Body is 6061 T6 Billet Aluminum
  • Latch is 7075 T6 
  • Black Type III Hardcoat Anodizing


Dust Cover

  • Dust Cover, Spring, and Rod are constructed from 4150 Steel
  • Black Type III Hardcoat Anodizing


Forward Assist

  • Constructed from 4150 Steel
  •  Includes Plunger, Forward Assist Pawl, Retainer pin, and spring


Gas Block

Specifications:

  • Constructed of Steel
  • Set screw mounts
  • Fits .750 Dia Barrels
  • Color: Black Phosphate finish


Gas Tube

  • Material: Stainless Steel (optimal heat and corrosion resistance)
  • Mil-Spec Dimensions (consistant gas flow)
  • Length: 9.75"
  • Made in the U.S.A


Write a review

Note: HTML is not translated!
    Bad           Good

DISCLAIMER

Kit shown assembled to display finished product

FREE

Shipping on all orders! All orders ship out within 48h during weekday (excluding items that need to be test-fired)

RESTRICTION

This product cannot be shipped out of the U.S.A

Under CALIFORNIA STATE LAW AB 857: 80% Lower Receivers will not be shipped to CA residents

ASSEMBLE

Kit assemble may take up to 10 business days to process

  • Views: 59931
  • Product Code: AR-15 ''STRYKER'' Carbine Kit
  • Availability: In Stock
  • $425.99
  • $359.99

Available Options

Tags: OUTDOORSPORTSUSA, M-LOK, 15 INCH HANDGUARD, AR-15, .223, 5.56, NATO, 16 INCH HANDGUARD, 1:8 TWIST, PARKERIZED, CARBINE GAS SYSTEM, BIRDCAGE MUZZLE BRAKE, MIL SPEC, MADE IN U.S.A, BCG, BLACK NITRIDE,