Mosin Nagant M91/30 Scope with Picatinny Rail - NEW VERSION (EXTENTION LENGHT)
Designed to replace the rear sight base (no need to drill or tap on the
rifle as this mount simply replaces the rear sight base)
The bottom of mount is a tappered 13mm dovetail to perfectly match the tapered dovetail on the barrel of the 91/30 rifle
This scope mount work very well on 91/30, the rail line up correctly with the barrel of rifle
Tight with 4 screws, Very solid and stable mount for your long eye relief scope
Machined from aluminum and has a matte black finish
THIS IS EXTENTION LONG NEW VERSION, AS YOU CAN SEE IN THE PHOTOS...
Designed to work with any Bipod that mounts onto a standard sling stud - Harris Style, folding, etc.Sling stud is retractable and made of steel.Body Material: High Quality AluminumRail type: Picatinny/WeaverLength: 2"Weight: 2.0 oz..
Material: High Quality Aluminum Rail type: Picatinny/Weaver Bipod Adapter Rotatable sling stud built in is perfect for mounting bipods or attaching to sling swivels. Works great with Harris bipods or any other bipods that mount onto standard sling stud...
This Universal pistol mount will fit any pistol with picatinny/weaver rail under the frame in front of the trigger guard.Perfect for adding pistol scope or red dot sight on the top rail,
flashlight on the bottom rail under the barrel, and laser sight on the
side rail.This mount enable you to still use your iron sights.You can easily mount most tactical accessories with this mount. All hardware Included!5.1" long with 10 Weaver/Picatinny Slots on Top, 3 slots on the bottom, and 1 slots on the side.Material: High Quality AluminumRail Type: Picatinny/WeaverFinish: Matte black FinishWeight: 4 ozTotal height: 2.95 inchesTotal length: 5.1 inchesTop rail length: 4.13 inchesTop rail width: 7/8 wideBottom rail length: 1.38 inchesBottom rail width: 7/8 wideSide rail length: 1.5 inchesSide rail width: 7/8 inches..
This 12GA 1" Shotgun Magazine Tube Rail Mount is design to fit onto most 1” diameter Extended Shotgun Mag tubes.
When mounted onto you Shotgun Extended Magazine tube, this will allow
you to attach multiple weaver & Picatinny style accessories to your
The rails are designed so that you can attach your accessories like
Lasers and Flashlight at any of the 5 angles that the rails provide.
You can either mount your accessories at the typical 3, 6, and 9
O’clock positions; or mount the accessories in the 4/5 and 7/8 O’clock
This can also be used on any 1” diameter accessories like 1” scope tube bodies, flashlights, and lasers.
Mounts onto most 12 gauge shotgun mag tubes with the two provided Allen head bolts.
Installation may require user to disassemble shotgun barrel, magazine tube/end cap/ clamp.
Fits 1” Diameter tubes
Overall Height: 1.5”
Overall Length: 1.4”
Over 6-inch fully Picatinny-compatible top rail with 15 slots; accepts Weaver-style rings and allows use of iron sights.Installs easily, No gunsmithing RequiredMaterial: High Quality AluminumBlack Rubber Rail Guards IncludedRail Type: Picatinny/WeaverDimensions: 6.1"x1.6"x1.8"(L x W x H)Weight: 6.3 oz..
HK / H&K Style Tactical Red Dot / Scope Mount - Claw Mount Rail for GSG-5 , GSG5 Black anodized aircraft grade aluminum Accepts all standard Weaver / 1913 accessories Clamps directly to top of receiver Compatible with most GSG-5 Rifles Rail Length: 5" Weight : 2.4 oz..
1. Product description:12" X 0.31" Uncut Pica-tinny Blank Rail.2 Specifications:Black anodized aircraft grade aluminumAccepts all standard Weaver / Pica-tinny 1913 accessoriesUncut to enable a custom fitLength: 12 inch ..
Product InformationShop more Leapers productsThis see-through picatinny-style flattop riser is constructed of anodized aluminum.It is of a tri-rail design that allows for the attachment of accessories.
Technical InformationRiser Height: 1.02"Fits Picatinny or Weaver railTri-rail for accessory mountingAnodized aluminum
Rail Type: PicatinnyRail Length: 3.28 inchMaterial: T6 AluminumColor/Finish: Black/MatteFits: M-1 CarbineAllows you to add a high-power scope of your choice to your M1 carbine.Mounts by replacing the rear gun sight.
7.62x39 Side Mount PlateTHIS PLATE IS REQUIRED IN ORDER TO PROPERLY MOUNT AND FIT A SIDE RAIL QUICK RELEASE MOUNT TO YOUR 7.62 RIFLE OR VARIANT.Length: 4 inchesWeight: 2.5 ozFits Both Milled and Stamped ReceiversSteel..
Constructed by aluminum alloy in andoized matte black finish.Quick release Thumb tightening system,Mounts to a common 20mm rail system.Fits AR series/M series and the other Flat Tops.See Through design allows the users to see the iron sights when mounted.Length:85mm(3.35"),High:31mmWeight: 110gRise: 1"Material: Aluminum alloy..
Specifications:Material:AluminumWeight:1.5 oZType:Picatinny/WeaverLength:1.2 inchWidth:1.6 inchHeight:0.75 inchMade to raise your accessory or optic which can be very helpful when mounting a scope or red dot sight on an AR-15 style rifle...
AluminumWeight: 1.8 ozPicatinny/Weaver5 Rails/Slots• Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish• Innovative Shared Rails for Versatile Accessory Placements at 45 and 90 Degree Angles to Allow for Instant Aiming Switch Among Iron Sight, Optical Sight, Laser and/or Flashlight• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail• Tight Tolerance Control with Anti-rotation Feature to Guarantee Most Positive and Repeatable Zero and Re-zero Capability• Integral Design with Overall Crocodile Profile and Light Weight Machine Cut for Optimal Tactical Applications..