✈✈ Free shipping on all orders ✈✈

Special Offers

Show:
Sort By:

AR-15 ''CYCLONE'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Super Slim Free Float Handguard with Accessory Rails and Steel Barrel NutM-LOK Slots Matte Black Finish Inside Diameter Total Weight: 7" - 8.9 OZ Anti Rotation TabsAircraft- Grade AluminumOne Piece Free Float Design Full Length Picatinny Top Rail Super Slim Light Weight Design AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 .223 Black Steel Muzzle Brake.223 / 5.56Black Steel Thread pitch 1/2x28 Overall length 2 1/2" Weight: 2.4 ozHelps control muzzle rise and recoilInc..

$409.99 $329.99

AR-15 ''HORUS'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lightweight Upper ReceiverMa..

$399.99 $279.99

AR-15 ''RIGHTEOUS'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-7''Material: Aircraft grade 6061 aluminum Length: 7"Finish: Black hard coat type 3 anodizedSteel barrel nut included Flush fit onto receiver AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lightweight Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedAR-15 .223/5.56 Bolt Carrier Group- Black NitridePR..

$459.99 $299.99

AR-15 ''TRIDENT'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail.  Finish: Black annodized Barrel nut material:  SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC ..

$399.99 $289.99

AR-15 ''STARS AND STRIPES'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Carbine Length 7"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:7"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 .223 5.56 Nato Steel Shark Muzzle Brake|American Flag LazerCNC Machined High Quality SteelHeat Treated.223 / 5.56 Nato Shark Muzzle BrakeSide Ported And Ported On TopSolid Machined ConstructionBlack Oxide FinishReduced Back Pressure1/2"x28 Pitch Washer IncludedWraps aroun..

$389.99 $299.99

AR-15 ''OLD GLORY'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumIncludes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiver7075 T6 Aluminum2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Length: 10"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"Barrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:7 Twist Parkerized FinishMaterial: 4150 Heat&nbs..

$399.99 $309.99

AR-15 ''MALICE'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Tactical T-Series Free Floating 7 inch Carbine Handguard Quad Picatinny Rail Mount System fit .223 5.56 Rifle GunsFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: 180mm (7.0 inch)Weight (net): 340g (12.0 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock proof can be used on real fire caliber AR-15 5.56 NATO 1:7 Twi..

$399.99 $289.99

AR-15 ''MERCENARY'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguard6061 AluminumKEYMOD HANDGUARDLength: 12"Includes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 Mock Muzzle Brake Flush Mount Shroud 1/2x28 ThreadCNC Precision Machined Superior SteelSide Ported And Ported On Top1/2X28 PitchBlack Parkerized FinishHeat TreatedWraps around your threaded bar..

$449.99 $339.99

AR-15 ''THE ADMIRAL'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 10" Ultra Slim Keymod Handguard [CERAKOTE] | SNIPER GRAYConstructed of 6061 AluminumIncludes 2 Black Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98" Color may vary slightly from picture posted BCA 10.5'' 5.56 Nato Barrel | Made in U.S.AManufacture: Bear Creek Arsenal Chamber: 5.56 NATO Length: 1..

$489.99 $349.99

AR-47 ''LaMOE'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 15Inch Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 16" Rifle Barrel 7.62x39 1:10 Twist Finish: ParkerizedTwist: 1/10Gas Block Diameter: .750"Carbine Length with a gas hole diameter o..

$379.99 $349.99

AR-47 ''SUNDOWN'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Light Frame Rail System | CERAKOTE Burnt BronzeMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 12" Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock locationTop rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Sniper Gray Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 10" 7.62X39 1..

$489.99 $379.99

►►AR-47 ''762'' Side Charging Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 15Inch Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 16" Rifle Barrel 7.62x39 1:10 TwistFinish: ParkerizedTwist: 1/10Gas Block Diameter: .750"Carbine Length with a gas hole diameter of 0.1025..

$489.99 $329.99

AR-15 ''STANDARD'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Light Weight Keymod Hand GuardLength: 7''6061 Aluminum Super Slim Design Black Anodized Keymod Steel Barrel Nut Included Lightweight (9.6-10.7 OZ) Free Float Includes Accessory rails Birdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lightweight Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedAR-15 .22..

$349.99 $249.99

►►AR-15 ''RIGHTEOUS SIDE CHARGING EDITION'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-7''Material: Aircraft grade 6061 aluminum Length: 7"Finish: Black hard coat type 3 anodizedSteel barrel nut included Flush fit onto receiver AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- Side Charging HandleSide Charging Handle (Bolts on Directly to Bolt Carrier) IncludedBolt Carrier Group IncludedPerfect for Rear S..

$489.99 $319.99

►►AR-15 ''HORUS SIDE CHARGING EDITION'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 7",10",12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- Side Charging Handl..

$459.99 $309.99

AR-15 ''REBEL'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Super Slim Free Float Handguard with Accessory Rails and Steel Barrel NutM-LOK Slots Matte Black Finish Inside Diameter Total Weight: 7" - 8.9 OZ Anti Rotation TabsAircraft- Grade AluminumOne Piece Free Float Design Full Length Picatinny Top Rail Super Slim Light Weight Design AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High q..

$359.99 $329.99

AR-15 ''UNITY'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC Machined High Quality SteelHeat TreatedMulti Ported DesignSolid Machined ConstructionBlack Oxide FinishTuned ported on top to Reduce muzzle riseSolid bottom controls dust printing1/2"x28 Thread PitchWeight: 2.2 oz.Lenghth: 2" Approx.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0...

$459.99 $319.99

AR-15 ''VULTURE'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 M-LOK New Design Rail SystemMaterial: Aircraft grade 6061 aluminum Available Length: 10'',12'',15"Internal diameter: 1.33 Wide, 1.65 High Finish: Black hard coat type 3 anodizedSteel barrel nut included 6 screw fasteners design with proprietary screw for easy installation Flush fit onto receiver Spanner wrench needed to torque barrel nut to spec (not included) hex wrench All rail sizes do come with two 3 slot M-LOK or (1.58") AR-15 5.56 NATO Match Grade 1:8 Twist Rifle Barrel- 16"CNC Precision Machined  4150 Heat Treated SteelDurable Black Nitride FinishGas Block System: 0.750M4 Contour  1:8 Twist rate1/x28 ThreadedMade ..

$379.99 $339.99

AR-15 ''HAWK'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Super Slim Free Float Handguard with Accessory Rails and Steel Barrel NutM-LOK Slots Matte Black Finish Inside Diameter Total Weight: 7" - 8.9 OZ Anti Rotation TabsAircraft- Grade AluminumOne Piece Free Float Design Full Length Picatinny Top Rail Super Slim Light Weight Design AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 .223 5.56 Nato STEEL Shark Muzzle Brake 1/2x28 Pitch ThreadCNC Machined High Quality SteelHeat Treated.223 / 5.56 Nato Shark Muzzle BrakeSide Ported And Port..

$359.99 $309.99

AR-15 ''STANDARD'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 7",10",12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lightweight Upper Rec..

$359.99 $259.99

AR-15 ''WIDOW'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER, OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Magpul M-LOK Hand Guard | Made in U.S.AMOE M-LOK Hand Guard, Carbine-LengthWeight: 6.8 oz.Length, overall: 7.1 in.Length, mounting: 6.6 in.Height, excluding lip: 2.5 in.Width, max: 2.2 in.USA MADEBCA 16" 5.56 Nato Match Grade 1:8 Twist Rifle Barrel | Made in U.S.A Manufacture: Bear Creek ArsenalCNC Precision Machined  4150 Heat Treated SteelDurable Black Nitride FinishGas Block System: 0.750M4 Contour  1:8 Twist rate1/2x28 ThreadedMade in USAAR-15 Phantom Muzzle Brake       CNC Machined High Quality 4140 Steel        Finish: Black Phosphate        Patented long..

$459.99 $429.99

AR-15 ''SENTINEL'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBarrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mock Muzzle Brake Flush Mount Shroud 1/2x28 Thread"Over Barrel Flush Mount Design"CNC Precision Machined ConstructionHigh Strength Billet AluminumHeat Treated1/2x28 Reverse ThreadColor: Matte B..

$309.99 $279.99

AR-15 ''CREED'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 MAGPUL M-LOK HAND GUARD CARBINE | USA MADEMOE M-LOK Hand Guard, Carbine-LengthWeight: 6.8 oz.Length, overall: 7.1 in.Length, mounting: 6.6 in.Height, excluding lip: 2.5 in.Width, max: 2.2 in.USA MADEAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 DELTA RING ASSEMBLYAluminum Delta ring with Black Anodized finish.Weld spring ..

$469.99 $359.99

AR-15 ''LIBERTY'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 12”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized  Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 STAINLESS STEEL BARREL ..

$409.99 $339.99

AR-15 ''VALOR'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail.  Finish: Black annodized Barrel nut material:  SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 .223 A2 STAINLESS STEEL BIRDCAGE MUZZLE BRAKEStandard GI styleCNC machined from solid 303 stainless steel bar stockThread pitch 1/2x28 For AR15Rust and corrosion resistant Stainless steel AlloyOverall length1¼Helps control muzzle ri..

$369.99 $319.99

AR-15 ''VIPER'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper Rec..

$339.99 $289.99

AR-15 ''REACTION'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR15 10" Super Slim Keymod handguard w/STEEL Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.10" long Rifle LengthRemovable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 Competition Muzzle Brake (TPI) Black oxide finishHeat treated (to harden the metal)TPI competition design with 9 portsLength: 2.3..

$449.99 $399.99

AR-15 ''VICTORY'' Carbine Kit

* THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** *KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED *UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)*10-INCH EXTENDED LENGTH ONE PIECE FREE FLOAT RAIL Four military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etc    Length:  (10.0 inch)    Weight (net):(14 ounce)    Inside Dia 46mm (1.8 inch)    Lower rail style with CNC procedure    One piece style more accurate    T style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic look    Light weight in precision    Easy and quick installation    High quality aluminum alloy in durable black matte finish    With hex key and gift box    Fit most mod..

$359.99 $319.99

AR-15 ''SALVO'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 M-LOK New Design Rail SystemMaterial: Aircraft grade 6061 aluminum Length: 10"Internal diameter: 1.33 Wide, 1.65 High Finish: Black hard coat type 3 anodizedSteel barrel nut included 6 screw fasteners design with proprietary screw for easy installation Flush fit onto receiver Spanner wrench needed to torque barrel nut to spec (not included) hex wrench All rail sizes do come with two 3 slot M-LOK or (1.58") AR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedPlease refer to y..

$379.99 $329.99

AR-15 ''VALIANT'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10'' 12'' 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized  Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section,..

$379.99 $329.99

AR-15 ''ARBITER'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 10" Free Float Keymod Handguard Rail SystemLightweight handguard with 7 angled surfaces for attaching keymod rail sections, each with 12 holes. The top Picatinny/Weaver rail has 27 slots. Includes Barrel Nut, setscrew nut and Allen wrench.Material: CNC Precision Machined 6061 AluminumFinish: Hard Black AnodizedLength: 12"Rhino R-23 Tactical Magwell Grip and FunnelThe Rhino R-23™ tactical magwell grip and funnel is designed to significantly improve magazine reload speed and firearm handling. The Rhino™ reduces magazines change times on average by 48% and without ever having to take your eyes off your target. The magazine well grip gives you full contr..

$339.99 $319.99

AR-15 ''PATRIOT'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized  Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold sepa..

$399.99 $349.99

AR-15 ''AEQUITAS'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper Rec..

$349.99 $319.99

AR-15 ''PRISM CERAKOTE'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Cerakote FDE -Ultra Light Frame Rail System 12"[CERAKOTE] | Robins Egg | Sniper Gray | Red | Sig Pink | FDE |aterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to sp..

$399.99 $369.99

AR-15 ''INFILTRATOR'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized  Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold sepa..

$429.99 $349.99

AR-15 ''INFAMY'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Carbine Length 7"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:7"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR15 1/2x28 Threaded .223 5.56 Thread-On Fake Can Muzzle BrakeCNC Machined High Quality Aluminum Billet1/2"x28 Thread PitchSolid Machined ConstructionType 3 Anodized FinishReduces Muzzle Rise223/556 ApplicationInside Diameter 0.76"Measures 6.15 Inch Total LengthWeight 3.9ozAR-1..

$399.99 $329.99

AR-15 ''STRYKER'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum.Length: 15”Internal diameter: 1.39” width 1.67 height.Finish: Black Hard-coat type III Anodized.  Barrel nut material:  Steel.6 screw fasteners design with proprietary screw for easy installation.Flush fitment on receiver.Inside Diameter: 1.39".Spanner wrench needed to torque barrel nut to spec (not included) and hex wrench.Rail comes with two 3 slots M-LOK or (1.58”).15” M-LOK location: 8 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 5 M-LOK sections/ Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the end of rail, the ..

$369.99 $349.99

AR-15 ''SHEEPDOG'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 / M4 Quad Rail Hand Guard Oval Ports 6.5" T6 6061 Aircraft Aluminum    Bead Blast with Type III Anodizing    Precise CNC machining    Mil Spec 1913 Picatinny    2 Piece Drop In Rail System    OVAL PortsDrop-in Rail Systems guarantee precise fitment with your Mil Spec Standard AR M4 upper receiverAR-15 Delta Ring Assembly w/ Steel Barrel NutAluminum Delta ring with Black Anodized finish.Weld spring with Phosphate finishSnap RingHeat Treated Steel Barrel nutComes Fully AssembledUsed for installing barrel to upper receiver and retaining drop in style hand guard.Birdcage Muzzle BrakeSPECS: Machined steel, matte bla..

$359.99 $299.99

AR-15 ''MARAUDER'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedPlease refer to your local state laws before purchasingAR-15 KRINKOV MUZZLE FLASH CAN BRAKEInner cone recycles gas pressure into action for efficient cycling in SBR’s and reduce muzzle flash. Diameter: 1 1/2Thread pitch: 1/2x28Weight: 8.4 ozLength..

$379.99 $339.99

AR-15 ''NEMESIS'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail.  Finish: Black annodized Barrel nut material:  SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC ..

$339.99 $289.99

AR-15 ''THE NIGHTWATCH'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail.  Finish: Black annodized Barrel nut material:  SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 1/2x28 Threaded .223 5.56 Thread-On Fake Can M..

$379.99 $349.99

AR-15 ''OBSIDIAN'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15  Super Keymod Free Float HandGuard .223/556 |Steel Barrel NutLength: 10"Color:  BlackMaterial:   6061 T6 AluminumMonolithic Top RailWill Accommodate 99.9% of all micro low profile gas blocksUltra Lightweight but Heavy Duty Design.Barrel Nut- (Maximum Inside Dimensions of Barrel Nut is 1″)Barrel nut is intended for .223/5.56 300 blackout etc… RiflesRail will not Fit .308 Caliber RiflesKeymods at 3, 6 and 9 o’clock positionsAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR15 1/2x28 Threaded .223 5.56 Thread-On Fake Can M..

$319.99 $289.99

AR-15 ''MISTRESS'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**[HAND GUARD LENGTH OPTION]AR-15/47/9/300AAC Clamp on Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 10'',12'',15''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail.  Finish: Black annodized Barrel nut material:  SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 STAINLESS STEEL BARREL .223 WYLDE 1:8 TWISTLength: 16”Material: 416R stainless steelThread Pitch: 1/2x28Gas Type: CarbineTwist: 1:8Chambered: .223 Wylde (compatible with ..

$419.99 $359.99

AR-15 ''223'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**12'' Extended Length One Piece Free Float RailFree Float, Tactical T-Series, One Piece Carbine Style, Full Metal for Real Fire Caliber, 7 Inch, Easy & Quick Installation Model: FFAR12-OFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength:  (12.0 inch)Weight (net):(16 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock..

$309.99 $269.99

AR-15 ''UPGRADED'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**12'' Extended Length One Piece Free Float RailFree Float, Tactical T-Series, One Piece Carbine Style, Full Metal for Real Fire Caliber, 7 Inch, Easy & Quick Installation Model: FFAR12-OFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength:  (12.0 inch)Weight (net):(16 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock..

$329.99 $299.99

AR-15 Carbine Upper Kit | ASSEMBLED & TEST FIRED

** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel Nut-12''Constructed of 6061 AluminumPre-Drilled Steel Barrel NutFits any AR-15 upper receiver2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"Birdcage Muzzle BreakMachined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washer.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750..

$219.99 $199.99

AR-15 Pistol Upper Kit | ASSEMBLED & TEST FIRED

** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER MAY TAKE UP TO 10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel Nut-7''Constructed of 6061 AluminumPre-Drilled Steel Barrel NutFits any AR-15 upper receiver2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper ReceiverMa..

$199.99 $179.99

USA Made .223/5.56/300 BLK Bolt Carrier Group- Diamond (DLC)

AR-15 .223/5.56 Bolt Carrier Group- DIAMOND (DLC) (Made in USA)CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treat..

$169.99 $117.99