✈✈ Free shipping on all orders ✈✈

Search

Search Criteria

Products meeting the search criteria

Show:
Sort By:

AR-15 ''RIGHTEOUS'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-7''Material: Aircraft grade 6061 aluminum Length: 7"Finish: Black hard coat type 3 anodizedSteel barrel nut included Flush fit onto receiver AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lightweight Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedAR-15 .223/5.56 Bolt Carrier Grou..

$459.99 $299.99

AR-15 ''INFILTRATOR'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized  Barrel nut material:  SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod ..

$429.99 $349.99

AR-15 ''THE NIGHTWATCH'' Pistol Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail.  Finish: Black annodized Barrel nut material:  SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 1/2x28 Threaded .223 5.56 Th..

$379.99 $349.99

KAK Industries - Shockwave Blade Pistol Stabilizer - Black [Made In U.S.A]

KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - BLACKFeatures:– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.– Available in black and flat dark earth (this listing is for black)– Quick and easy to install– Provides additional support during firing– Weighs a scant 5.0 ounces– ATF approved for pistol use– Veteran designed, engineered, marketed, and sold– Made in U.S.A."Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation."..

$37.99

KAK Industries Shockwave Blade Pistol Stabilizer- OD Green

Features:– Weighs at 5.0 ounces– ATF approved for pistol use"Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation."-Made in U.S.A Color may vary slightly from picture posted...

$43.99 $37.99

KAK Industries Shockwave Blade Pistol Stabilizer- FDE- Flat Dark Earth

Features:– Weighs at 5.0 ounces – ATF approved for pistol use "Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation."Color may vary slightly from picture posted. ..

$43.99 $37.99

AR-15 Kak Shockwave Tube

12 length adjustment settings.Anti-rotation and anti-thrust design stays put without sliding forward or spinning.Tube is flush with rear of SHOCKWAVE BLADE when fully collapsed.When fully adjusted out the assembly is very rigid..Strong CASTLE NUT design accepts all mil spec endplates and any aftermarket endplate.Accepts all carbine buffer systems..4.8 OZ7.25 TOTAL OVERALL LENGTH ..

$19.99

AR-15 Eagle Lite Milled Buffer Tube Kit And Kak Shockwave Blade Stabilizer

KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - COLOR OPTIONFeatures:– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.– Available in black and flat dark earth– Quick and easy to install– Provides additional support during firing– Weighs a scant 5.0 ounces– ATF approved for pistol use– Veteran designed, engineered, marketed, and sold– Made in U.S.A.Manufacture Description: Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.AR-15 Eagle Lite Milled Buffer Tube Kit Includes:     ..

$72.99

KAK Industries Shockwave Blade And KAK Buffer Tube Kit

KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER -COLOR OPTIONFeatures:– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.– Available in black and flat dark earth – Quick and easy to install– Provides additional support during firing– Weighs a scant 5.0 ounces– ATF approved for pistol use– Veteran designed, engineered, marketed, and sold– Made in U.S.A.Manufacture Description: Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.KAK Shockwave Tube12 length adjustment settings.Anti-rotation and anti-thrust design stays ..

$74.99 $68.99

AR-15 Overmold Shockwave Lower Build Kit

AR-15 Standard Lower Receiver Parts Kit-LPK17-EOComplete Kit Includes:·             Pistol Grip AR-15 Right Hand Overmolded Rubber (Black)·             Standard Trigger Guard·             Semi Trigger·             Semi Hammer·             Semi Disconnector·             Semi Selector·             Bolt Catch Spring·             Detent Spring·             Bolt Catch Buffer·             Take Down Detent·             Bolt Catch· &nb..

$99.99