-
Your shopping cart is empty!
Your shopping cart is empty!
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 MIL-SPEC UPPER RECEIVER -DRY FILM LUBE -MADE IN U.S.A.Black Anodiz..
$399.99 $279.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguard-7''6061 AluminumKEYMOD HANDGUARDLength: 7"Includes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Mad..
$459.99 $299.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppresso..
$349.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Carbine Length 7"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:7"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 .223 5.56 Nato Steel Shark Muzzle Brake|American Flag LazerCNC Machined High Quality SteelHeat Treated.223 / 5.56 Nato Shark Muzzle BrakeSide Ported And Ported On TopSolid Machined ConstructionBlack Oxide FinishReduced Back Pressure1/2"x28 Pitch Washer I..
$389.99 $299.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumIncludes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiver7075 T6 Aluminum2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Length: 10"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"Barrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:7 Twist Parkerized FinishMaterial: ..
$399.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Tactical T-Series Free Floating 7 inch Carbine Handguard Quad Picatinny Rail Mount System fit .223 5.56 Rifle GunsFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: 180mm (7.0 inch)Weight (net): 340g (12.0 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock proof can be used on real fire caliber AR-15 ..
$399.99 $289.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Light Weight Keymod Hand GuardLength: 12'' 6061 Aluminum Super Slim Design Black Anodized Keymod Steel Barrel Nut Included Lightweight (9.6-10.7 OZ) Free Float Includes Accessory rails AR-15 Mock Muzzle Brake Flush Mount Shroud 1/2x28 ThreadCNC Precision Machined Superior SteelSide Ported And Ported On Top1/2X28 PitchBlack Parkerized FinishHeat TreatedWraps around your threaded barrel and threads onto 1/2x28 thread pitch.Custom Design With Extra Long Razor Sharp Steel ProngsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223..
$449.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 15Inch Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 16" Rifle Barrel 7.62x39 1:10 Twist Finish: ParkerizedTwist: 1/10Gas Block Diameter: .750"Carbine Length with a g..
$379.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Light Frame Rail System | CERAKOTE Burnt BronzeMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 12" Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock locationTop rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Sniper Gray Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyA..
$489.99 $369.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC Machined High Quality SteelHeat TreatedMulti Ported DesignSolid Machined ConstructionBlack Oxide FinishTuned ported on top to Reduce muzzle riseSolid bottom controls dust printing1/2"x28 Thread PitchWeight: 2.2 oz.Lenghth: 2" Approx.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rat..
$459.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Super Slim Ultra Light Free Float 7" Inch Carbine Length HandguardMaterial: Aircraft Grade AluminumRail Type: Picatinny/WeaverDual Rail Type: Top/BottomSuper Slim Design 1.35" Inner DiameterLength: 7" inchHeight: 2.27" inchWidth: 1.65" inchWeight: 7.4 Oz.Flat Dark Earth CerakoteIncluded a Solid Steel barrel nut for easy installationColor may vary slightly from picture posted.AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC Machined High Quality SteelHeat TreatedMulti..
$399.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBarrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mock Muzzle Brake Flush Mount Shroud 1/2x28 Thread"Over Barrel Flush Mount Design"CNC Precision Machined ConstructionHigh Strength Billet AluminumHeat Treated1/2x28 Reverse Th..
$309.99 $269.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Carbine Length 7"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:7"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR15 1/2x28 Threaded .223 5.56 Thread-On Fake Can Muzzle BrakeCNC Machined High Quality Aluminum Billet1/2"x28 Thread PitchSolid Machined ConstructionType 3 Anodized FinishReduces Muzzle Rise223/556 ApplicationInside Diameter 0.76"Measures 6.15 Inch Total Leng..
$399.99 $349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 12”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 STAIN..
$409.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 .223 A2 STAINLESS STEEL BIRDCAGE MUZZLE BRAKEStandard GI styleCNC machined from solid 303 stainless steel bar stockThread pitch 1/2x28 For AR15Rust and corrosion resistant Stainless steel AlloyOverall length1¼Helps..
$369.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight ..
$339.99 $299.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR15 10" Super Slim Keymod handguard w/STEEL Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.10" long Rifle LengthRemovable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 .223 TPI Competition Compact Muzzle Brake for 1/2x28 Pitch With Free WasherBlack oxide finish, solid precision machi..
$449.99 $399.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Super Keymod Free Float HandGuard .223/556 |Steel Barrel NutLength: 10"Color: BlackMaterial: 6061 T6 AluminumMonolithic Top RailWill Accommodate 99.9% of all micro low profile gas blocksUltra Lightweight but Heavy Duty Design.Barrel Nut- (Maximum Inside Dimensions of Barrel Nut is 1″)Barrel nut is intended for .223/5.56 300 blackout etc… RiflesRail will not Fit .308 Caliber RiflesKeymods at 3, 6 and 9 o’clock positionsAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR15 1/2x28 Threaded .223 5.56 Th..
$319.99 $289.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 M-LOK New Design Rail SystemMaterial: Aircraft grade 6061 aluminum Length: 10"Internal diameter: 1.33 Wide, 1.65 High Finish: Black hard coat type 3 anodizedSteel barrel nut included 6 screw fasteners design with proprietary screw for easy installation Flush fit onto receiver Spanner wrench needed to torque barrel nut to spec (not included) hex wrench All rail sizes do come with two 3 slot M-LOK or (1.58") AR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerize..
$379.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10'' 12'' 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come wi..
$379.99 $349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod ..
$399.99 $359.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguard-7''6061 AluminumKEYMOD HANDGUARDLength: 7"Includes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 .223 A2 STAINLESS STEEL BIRDCAGE MUZZLE BRAKEStandard GI styleCNC machined from solid 303 stainless steel bar stockThread pitch 1/2x28 For AR15Rust and corrosion resistant ..
$369.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Cerakote FDE -Ultra Light Frame Rail System 12"[CERAKOTE] | Robins Egg | Sniper Gray | Red | Sig Pink | FDE |aterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torqu..
$399.99 $369.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod ..
$429.99 $379.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 1/2x28 Threaded .223 5.56 Th..
$399.99 $359.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum.Length: 15”Internal diameter: 1.39” width 1.67 height.Finish: Black Hard-coat type III Anodized. Barrel nut material: Steel.6 screw fasteners design with proprietary screw for easy installation.Flush fitment on receiver.Inside Diameter: 1.39".Spanner wrench needed to torque barrel nut to spec (not included) and hex wrench.Rail comes with two 3 slots M-LOK or (1.58”).15” M-LOK location: 8 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 5 M-LOK sections/ Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the..
$369.99 $349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 / M4 Quad Rail Hand Guard Oval Ports 6.5" T6 6061 Aircraft Aluminum Bead Blast with Type III Anodizing Precise CNC machining Mil Spec 1913 Picatinny 2 Piece Drop In Rail System OVAL PortsDrop-in Rail Systems guarantee precise fitment with your Mil Spec Standard AR M4 upper receiverAR-15 Delta Ring Assembly w/ Steel Barrel NutAluminum Delta ring with Black Anodized finish.Weld spring with Phosphate finishSnap RingHeat Treated Steel Barrel nutComes Fully AssembledUsed for installing barrel to upper receiver and retaining drop in style hand guard.Birdcage Muzzle BrakeSPECS: Machine..
$359.99 $309.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedPlease refer to your local state laws before purchasingAR-15 KRINKOV MUZZLE FLASH CAN BRAKEInner cone recycles gas pressure into action for efficient cycling in SBR’s and reduce muzzle flash. Diameter: 1 1/2Thread pitch: 1/2x28We..
$379.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Extended Length 16"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:16"AR-15 16" BARREL 300 AAC BLACKOUT 1:7 TWISTLength: 16”Chambered: .300 BLK (AAC Blackout)1:7 Twist.750” gas block diameterCarbine length with enhanced gas port hole diameter.5/8”X24 Tread Pitch4140 gun quality steel, heat treaded to RC 28-32 hardness, stress relievedParkerized finishEach barrel is made to precise specifications and designed to hold a 1.000” MOA at 100 yards with appropriate ammo and shooting techniques. This barrel car..
$489.99 $429.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**[HAND GUARD LENGTH OPTION]AR-15/47/9/300AAC Clamp on Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 10'',12'',15''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 STAINLESS STEEL BARREL .223 WYLDE 1:8 TWISTLength: 16”Material: 416R stainless steelThread Pitch: 1/2x28Gas Type: CarbineTwist: 1:8Chambered: .223 Wylde..
$419.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Extended Length 16"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:16"AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedAR15 1/2x28 Threaded .223 5.56 Thread-On Fake Can Muzzle BrakeCNC Machined High Quality Aluminum Billet1/2"x28 Thread PitchSolid Machined ConstructionType 3 Anodized FinishReduces Muzzle Rise223..
$439.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 KEYMOD FREE FLOAT CLAMP-ON STYLE HAND GUARD W/DETACHABLE RAILS/12"Free Float, Tactical T-Series, One Piece Carbine Style, Full Metal for Real Fire Caliber, 7 Inch, Easy & Quick InstallationT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookModel: KFC12Four military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: (12.0 inch)Weight (net):(16 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex ke..
$379.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR15 15" Ultra Slim Keymod Handguard W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutFits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.15" long Rifle LengthRemovable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"6" Slotted AR-15 Muzzle Brake Compensator - BlackRecoil Compensator w/ Sleek Custom DesignTwelve 45 Degree Ports (6 each side)1/2..
$459.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 Custom Steel "Zombie Slayer" Muzzle Brake 4"InchCNC Precision Machined Superior SteelSide Ported And Ported On Top1/2X28 PitchBlack Parkerized FinishHeat TreatedWraps around your threaded barrel and threads onto 1/2x28 thread pitch.Custom Design With Extra Long Razor Sharp Steel ProngsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Tw..
$489.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Tactical T-Series Free Floating 7 inch Carbine Handguard Quad Picatinny Rail Mount System fit .223 5.56 Rifle GunsFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: 180mm (7.0 inch)Weight (net): 340g (12.0 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock proof can be used on real fire caliber AR-15 .223..
$409.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight..
$329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Super Slim Ultra Light Free Float 7" Inch Carbine Length Handguard[CERAKOTE] | Robins Egg | Sniper Gray | Red | Sig Pink |Material: Aircraft Grade AluminumRail Type: Picatinny/WeaverDual Rail Type: Top/BottomSuper Slim Design 1.35" Inner DiameterLength: 7" inchHeight: 2.27" inchWidth: 1.65" inchWeight: 7.4 Oz.Includes: a Solid Steel barrel nut for easy installationColor may vary slightly from picture posted.AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Porte..
$399.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 STAINLESS STEEL BARREL .223 WYLDE 1:8 TWIST Length: 16”Material: 416R stainless steelThread Pitch: 1/2x28Gas Type: CarbineTwist: 1:8Chambered: .223 Wylde (compatible with .223 and 5.56)Feed ramps: M4This barrel is safe to shoot .223 and 5.56, but can provide a better grouping with the military pressured 5.56 Made in the USA AR15 Ultra Slim Keymod Handguards W/ Steel Barrel Nut Constructed of 7075 T6 AluminumIncludes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel Nut and 2 Black 32mm Shim/Barrel Nut Washer2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 P..
$199.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedPlease refer to your local state laws before purchasingTactical T-Series Free Floating 7 inch Carbine Handguard Quad Picatinny Rail Mount SystemFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: 180mm (7.0 inch)Weight (net): 340g (12.0 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable b..
$189.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 Free Float Quad Rail Handguard Carbine Length 7"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:7"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedAR-15 .223/5.56 Bolt Carrier Group- Black Nitride [OPTIONAL]PROUDLY MADE IN THE USA!CarrierMachined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military sp..
$159.99 $149.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 7Inch Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 7"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality ..
$189.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 12'' Super Keymod Free Float HandGuard .223/556 |Steel Barrel NutLength: 12"Color: BlackMaterial: 6061 T6 AluminumMonolithic Top RailWill Accommodate 99.9% of all micro low profile gas blocksUltra Lightweight but Heavy Duty Design.Barrel Nut- (Maximum Inside Dimensions of Barrel Nut is 1″)Barrel nut is intended for .223/5.56 300 blackout etc… RiflesRail will not Fit .308 Caliber RiflesKeymods at 3, 6 and 9 o’clock positionsBirdcage Muzzle BreakMachined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washer.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed R..
$189.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15/47/9/300AAC CLAMP ON RAIL SYSTEMMaterial: Aircraft grade 6061 aluminum/lockingLength: 7"Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC Machined High Quality SteelHeat Treate..
$179.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **Cerakote FDE| AR-15 Angle Cut Clamp on Keymod Handguard |Made in U.S.AAccepts keymod accessory railsClamp on style US Made Steel barrel nut included 3 FastenersAngled Cut Design 2 Keymod rails included Finsih: Cerakote FDEAR-15 Black Nitride 416R Stainless Steel Heavy Barrel 16" .223WLength: 16"Material: 416R Stainless Steel Finish: Black Nitirde Thread Pitch: 1/2x28Gas Type: CarbineTwist: 1:8Chambered: 223 Wylde (compatible with .223 and 5.56)Feed Ramps: M4 Heavy BarrelSpiral Flutes Dimpled: YesMade in USA Cerakote FDE| AR-15 MIL-SPEC UPPER RECEIVER- MADE IN U.S.AHigh Quality and lightweight stripped Upper receiver (does not include upper parts)Material: Aircraft grade aluminum Made in U.S.AFinish: Cerakote FDE USA Made .22..
$299.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR-15 5.56 NATO 16" Inch Rifle Barrel 1:7Twist Parkerized Finish Chamber: 5.56/.223Length: 16"Twist Rate: 1:7Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized AR-15 PINE CONE MUZZLE BRAKE CNC machined from solid 4150 steel constructionPhosphate finishSerrated design with 6 slots5/8”x24 thread pitchCaliber: .223/5.56Finish: phosphateWeight: 2.0 oz.Length: 2.14AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedAR-15 .223/5.56 Bolt Carrier Group- Black Nitride[OPTIONAL]PROUDLY MADE IN THE USA!CarrierMachined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedGround to meet military required tolerancesMPI (Mag Particle Inspected)Ga..
$179.99
** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **Ultra Lightweight Frame Rail System: Material: Aircraft grade 6061 aluminum/lockingLength: 15"Internal Diameter: 1.35" width 1.67" HeightKeymod Location: 3,6,9,12 o' clock Top rail has 4 slots or (1.78") section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black hard- coat type III anodized Steel barrel nut included Clamp on design with proprietary screw and locking washer for easy installation Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrench This rail does not come with key mod section, sold separately 18" Heavy Barrel with spiral flutes, Black nitride finish .223 Wylde Length: 18" Chambered in .223 Wylde Can shoot .223/5.561:8..
$359.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **AR 15 KEYMOD FREE FLOAT CLAMP-ON STYLE HAND GUARD W/DETACHABLE RAILS/12"12" Free Float Keymod Mid Length HandguardFree Float, Tactical T-Series, One Piece Carbine Style, Full Metal for Real Fire Caliber, 7 Inch, Easy & Quick InstallationT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookModel: KFC12Four military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: (12.0 inch)Weight (net):(16 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock proof can be used on real fire caliber&..
$209.99
** THIS KIT DOES NOT INCLUDE BOLT CARRIER GROUP **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **9MM BARREL AR-15 PLATFORMLength:16"Profile/contour: SOCOMChambered: 9x19 Luger 1:10 Twist All NFA rules apply4150 carbon steel heat treated Muzzle Threads: ½-36Parkerized FinishFits mil-spec receiversCan be used on Colt and Glock platforms AR-9Using the dependable blow back design (not drilled gas port for barrel) Made in the U.S.AAR-15 Super Keymod Free Float HandGuard .223/556 |Steel Barrel NutLength: 15"Color: BlackMaterial: 6061 T6 AluminumMonolithic Top RailUp to 2 FREE 3" Removable Key..
$259.99
-250x250.jpg "AR-15 ''HORUS'' Carbine Kit")
-250x250.jpg "AR-15 ''RIGHTEOUS'' Pistol Kit")
-1-250x250.jpg "AR-15 ''TRIDENT'' Pistol Kit")
-250x250.jpg "AR-15 ''STARS AND STRIPES'' Pistol Kit")
-250x250.jpg "AR-15 ''OLD GLORY'' Carbine Kit")
-250x250.jpg "AR-15 ''MALICE'' Pistol Kit")
-250x250.jpg "AR-15 ''MERCENARY'' Carbine Kit")
-250x250.jpg "AR-47 ''LaMOE'' Carbine Kit")
-250x250.jpg "AR-47 ''SUNDOWN'' Pistol Kit")
-250x250.jpg "AR-15 ''UNITY'' Carbine Kit")
-250x250.jpg "AR-15 ''TRIDENT MARK II'' Pistol Kit")
-250x250.jpg "AR-15 ''SENTINEL'' Carbine Kit")
-250x250.jpg "AR-15 ''INFAMY'' Pistol Kit")
-250x250.jpg "AR-15 ''LIBERTY'' Carbine Kit")
--250x250.jpg "AR-15 ''VALOR'' Pistol Kit")
-250x250.jpg "AR-15 ''VIPER'' Carbine Kit")
-250x250.jpg "AR-15 ''REACTION'' Carbine Kit")
-250x250.jpg "AR-15 ''OBSIDIAN'' Pistol Kit")
-250x250.jpg "New AR-15 ''SALVO'' Pistol Kit")
-250x250.jpg "AR-15 ''VALIANT'' Carbine Kit")
-250x250.jpg "AR-15 ''PATRIOT'' Carbine Kit")
-250x250.jpg "AR-15 \"THE BLACK PEARL\" Pistol Kit")
-250x250.jpg "AR-15 ''PRISM CERAKOTE'' Carbine Kit")
-250x250.jpg "AR-15 ''INFILTRATOR'' Pistol Kit")
-250x250.jpg "AR-15 ''THE NIGHTWATCH'' Pistol Kit")
-250x250.jpg "AR-15 ''STRYKER'' Carbine Kit")
-250x250.jpg "AR-15 ''SHEEPDOG'' Carbine Kit")
-250x250.jpg "AR-15 ''MARAUDER'' Pistol Kit")
-250x250.jpg "AR-15- 300 BLK Out ''FURY'' Carbine Kit")
-11918-250x250.jpg "AR-15 ''MISTRESS'' Carbine Kit")
-250x250.jpg "AR-15 ''ECHO'' Carbine Kit")
-250x250.jpg "AR-15 ''ENFORCER'' Carbine Kit")
-250x250.jpg "AR-15 ''INFINITY'' Carbine Kit")
-250x250.jpg "AR-15 ''SLAYER'' Carbine Kit")
-250x250.jpg "AR-15 ''ENCORE'' Carbine Kit")
-250x250.jpg "AR-15 ''VERITAS'' Carbine Kit")
-250x250.jpg "AR-15 ''TRIDENT CERAKOTE'' Pistol Kit")
-250x250.jpg "AR-15 Stainless Steel Carbine Upper Kit | No:14")
-250x250.jpg "AR-15 Pistol Upper Kit | No:12")
-250x250.jpg "AR-15 Pistol Upper Kit | No:23")
-250x250.jpg "AR-15 Pistol Upper Kit | No:24")
-250x250.jpg "AR-15 Carbine Upper Kit | No:20")
--250x250.jpg "AR-15 Pistol Upper Kit | No: 36")
-250x250.jpg "AR-15 Carbine Upper Kit | No:32")
-250x250.jpg "AR-15 Partial Upper Build Kit | No:10")
-250x250.jpg "AR-15 Side Charging Upper Kit | No:33")
/AR-15 KFC12 Rifle Upper Kit (1)-250x250.jpg "AR-15 Carbine Upper Kit | No:5")
-250x250.jpg "AR-9 Carbine Upper Kit | No:8")