AR-15 M-LOK SUPER SLIM FREE FLOAT HANDGUARD WITH STEEL BARREL NUT | MADE IN USA 7"7.5'' 9mm Parkerized Polished Chamber Barrel | Made in U.S.AAR-10 / LR-308 A2 Style Birdcage Muzzle BrakAR-15 MIL-SPEC UPPER RECEIVER - MADE IN U.S.AAR-15 CH..
AR-15 ANGLE CUT CLAMP ON M-LOK HANDGUARD | MADE IN USA 7"7.5'' 9mm Parkerized Polished Chamber Barrel | Made in U.S.AAR-10 / LR-308 Compact Muzzle Brake 5/8"x24 Pitch w/ Crush Washer (Made In USA) VersionAR-15 BILLET STRIPPED MOD 1 UPPER RECEIVER | MADE I..
**THIS UPPER PARTS KIT
DOES NOT COME ASSEMBLED**Upper Receiver Features:High quality and
lightweight stripped Upper ReceiverMaterial: Aircraft grade
AluminumFinish: Type 3 Black
AnodizedMade in U.S.A.Charging Handle
Features:7075 T6 AluminumType 3 Hard AnodizedSmoothest Operation
Under Extreme..
Features:Ultra-Hard Black Nitride FinishFull Heat Treated 8620 SteelPrecision Custom cut carrier designCompatible with standard AR-15 hammers. Colt and Glock 9mm CompatibleMADE IN USA..
Features:Length: 4.5"9 x 19 Parabellum1:10 Twist4150 Heat treated and stress relieved Chrome Moly Vanadium quality steel.Finish: Black NitridePolished Feed ramps Index pin Installed. Made in the U.S.AFits: AR-15MUZZLE BRAKE TREAD PITCH IS THE SAME AS AR-10 5/8x24..
Features:Length:10.5"Caliber: 9mmTwist: 1:10Thread Pitch: ''1/2x36"Material: 4150 gun quality steel heat-treated stress relieved.Finish: Black Nitride Made in the U.S.A.Fits: AR-Platform ..
Features:7075-T6 Billet Aircraft Grade AluminumFlat-Top with Picatinny RailSlick Side Upper with No Forward Assist or Shell DeflectorEjection Port Is Beveled and EnclosedMade in the U.S.ACERAKOTE COLOR OPTIONS: BLACK ANODIZED (AR9-UPPER-BILLET), BURNT BRONZE (BBR), FLAT DARK ..
Features:Finish: Blasted RAW7075-T6 Billet Aircraft Grade AluminumFlat-Top with Picatinny RailSlick Side Upper with No Forward Assist or Shell DeflectorEjection Port Is Beveled and EnclosedMade in the U.S.A..
Features:80% CompletedFully billet designAccepts Glock magazinesFire Safe / Safe markings engravedThreaded bolt catch holeFlared mag well aids with faster, easier magazine reloadsMag Well Is Fully Broached for A Perfect FitFinish: Black AnodizedMil Spec7075-T6 Billet AluminumMade In USACompatible wi..
Features:80% CompletedFully billet designAccepts Glock magazinesFire Safe / Safe markings engravedThreaded bolt catch holeFlared mag well aids with faster, easier magazine reloadsMag Well Is Fully Broached for A Perfect FitRAWMil Spec7075-T6 Billet AluminumMade In USACompatible with Glock MagazinesE..
Features:CNC Machined Aluminum
Buffer Tube to Fit Carbine Buffer and SpringBuffer Tube Finish:
Cerakote BRIGHT WHITEMachined Lower Slot to
Accept all Endplates and Sling Mounting AccessoriesSteel End plate, Castle
nut and Carbine SpringBuffer Tubes Measure
7-5/16"Buffer Tube Foam Pad is
m..
Features:CNC Machined Aluminum
Buffer Tube to Fit Carbine Buffer and SpringBuffer Tube Finish:
Cerakote BURNT BRONZEMachined Lower Slot to
Accept all Endplates and Sling Mounting AccessoriesSteel End plate, Castle
nut and Carbine SpringBuffer Tubes Measure
7-5/16"Buffer Tube Foam Pad is
made f..
Features:CNC Machined Aluminum Buffer Tube to Fit Carbine
Buffer and SpringBuffer Tube Finish: Cerakote EL GREENMachined Lower Slot to Accept all Endplates and
Sling Mounting AccessoriesSteel End plate, Castle nut and Carbine SpringBuffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is made from NPVC..
Features:CNC Machined Aluminum Buffer Tube to Fit Carbine
Buffer and SpringBuffer Tube Finish: Cerakote FDEMachined Lower Slot to Accept all Endplates and
Sling Mounting AccessoriesSteel End plate, Castle nut and Carbine SpringBuffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is made from NPVC also..
Features:CNC Machined Aluminum
Buffer Tube to Fit Carbine Buffer and SpringBuffer Tube Finish:
Cerakote HUNTER ORANGEMachined Lower Slot to
Accept all Endplates and Sling Mounting AccessoriesSteel End plate, Castle
nut and Carbine SpringBuffer Tubes Measure
7-5/16"Buffer Tube Foam Pad is
..
Features:CNC Machined Aluminum
Buffer Tube to Fit Carbine Buffer and SpringBuffer Tube Finish:
Cerakote LEMON ZESTMachined Lower Slot to
Accept all Endplates and Sling Mounting AccessoriesSteel End plate, Castle
nut and Carbine SpringBuffer Tubes Measure
7-5/16"Buffer Tube Foam Pad is
mad..
Features:CNC 6061-T6 Machined Aluminum Buffer
TubeBuffer Tube Finish: Cerakote
OD GREEN Machined Lower Slot to Accept
all Endplates and Sling Mounting AccessoriesSteel End plate, Castle
nut and Carbine Spring Buffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is
made from NPVC also known as..
Features:CNC Machined Aluminum Buffer Tube to Fit Carbine
Buffer and SpringBuffer Tube Finish: Cerakote PINK Machined Lower Slot to Accept all Endplates and
Sling Mounting AccessoriesSteel End plate, Castle nut and Carbine SpringBuffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is made f..
Features:CNC Machined Aluminum Buffer Tube to Fit Carbine
Buffer and SpringBuffer Tube Finish: Cerakote RED Machined Lower Slot to Accept all Endplates and
Sling Mounting AccessoriesSteel End plate, Castle nut and Carbine SpringBuffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is made from NPV..
Features:CNC Machined Aluminum Buffer Tube to Fit Carbine
Buffer and SpringBuffer Tube Finish: Cerakote ROBINS EGGMachined Lower Slot to Accept all Endplates and
Sling Mounting AccessoriesSteel End plate, Castle nut and Carbine SpringBuffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is made from NP..
Features:CNC Machined Aluminum Buffer Tube to Fit Carbine
Buffer and SpringBuffer Tube Finish: Cerakote SNIPER GRAY Machined Lower Slot to Accept all Endplates and
Sling Mounting AccessoriesSteel End plate, Castle nut and Carbine SpringBuffer Tubes Measure 7-5/16"Buffer Tube Foam Pad is made from ..
Features:CNC Machined Aluminum
Buffer Tube to Fit Carbine Buffer and SpringBuffer Tube Finish:
Cerakote ZOMBIE GREENMachined Lower Slot to
Accept all Endplates and Sling Mounting AccessoriesSteel End plate, Castle
nut and Carbine SpringBuffer Tubes Measure
7-5/16"Buffer Tube Foam Pad is
m..
Description:The RB5007 is a KynSHOT specially developed for 9 mm PCC
applications. Developed in collaboration with Blitzkrieg Components, LLC. 3.5
"16" barrels, optionally damped or non-damped, and for work with PCC
designs using all common 9mm loads. This buffer has been proven in the fierce
fiel..
Features:Phosphate finish1/2x36 thread pitchCaliber: 9x19 length: 1 3/4"Weight: 2.3 ozHelps control muzzle rise, flash and recoilFinished with a black phosphate with 5 down force ventsIncludes a Crush Washer..
Features:CNC Machined High Quality heat Treated Steel10 linear ports over the top to reduce muzzle rise 5 large ports on either side to dissipate gasFinish: Black Oxide Caliber: 9x19Thread Pitch: 1/2x 36Length: 2.3"Weight: 2.8ozIncludes a Crush Washer..
Features:CNC Precision Machined Construction6061 AluminumHeat Treated1/2X 36 Reverse Thread (Threads on both ways)Color: Matte BlackLength: 6 in.Weight: 4 oz2 -in- 1 Hybrid Fake Suppressor can thread directly on to
the end of the barrel, or it can be r..
Features:CNC Machined High Quality Heat Treated Steel3 ports over the top to reduce muzzle rise1 large port on either side to dissipate gas quicklyFinish: Black Oxide Caliber: 9x19mmThread Pitch: 1/2x 36Length: 1.7"Weight: 5.8ozJam nut included..
Features:Drop in Fit for Gen 1-4 & Glock Gen 59mmMachined From 416 Stainless Steel and Heat Treated to RC 41Non-Threaded1:16 Twist RateBlack Nitride FinishSaami Spec. 9mm Match ChambersPolished Feed Ramp**Warning**This Product Is to Be Installed by A Competent
Gunsmith.No Liability Is E..
Features:Caliber: 9MM/ 9x191:16 Twist Rate Machined from 416R Stainless Steel Barrel Heat Treated to RC41Non-ThreadeddPolished Feed Ramp Drop in fit for Gen 1-4 & Glock Gen 5Finish: RawMade In USA **Warning**This Product Is to Be Installed by..
The MEAN EndoMag is a magazine insert that converts your Gen
2 or Gen 3 5.56/.223 PMAGs housing into a 9mm magazine to use with standard AR
lower and 9mm upper of your choosing with a Glock or Colt Variant 9mm BCG. Features: Quickly and easily change calibers form .223/5.56 to a caliber
asso..
Important Update: In compliance with HB 1240, we regret to inform our valued Washington State customers that we are no longer offering AR-style product for sale in the state. We appreciate your understanding and support as we continue to provide a wide range of other high-quality product. For more information on HB 1240 and its impact on our inventory, please visit the official webpage of HB 1240 (https://app.leg.wa.gov/billsummary?BillNumber=1240&Year=2023) or feel free to contact our customer service team.