AR-15 ''REBEL'' Pistol Kit
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **
** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS **
** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED **
- Constructed of 7075 T6 Aluminum
- Pre-Drilled Steel Barrel Nut
- Fits any AR-15 upper receiver
- 7075 T6 Aluminum
- Comes with Steel Barrel Nut
- Monolithic top rail is continuous with flat top receiver
- 1913 Picatinny rail top
- The Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.
- length: 7"
- Removable rail System
- Sectional Rails Can Be Moved To Different Positions
- outside Diameter: 1.536"(without Rail)
- inside Diameter: 1.36" (without Rail)
- Height : 1.98"
- Chamber: 5.56/.223
- Length: 7.5"
- Twist Rate: 1:7
- Gas Port: 0.750"
- Gas System: Pistol
- Thread Pitch: 1/2x28
- Feed Ramps: M4
- Finish: Parkerized
- Made In USA
Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.
Includes crush washer
High quality and lightweight Upper Receiver
Material: Aircraft grade Aluminum
Finish: Black Anodized
PROUDLY MADE IN THE USA!
Constructed from 4150 Steel
Includes Plunger, Forward Assist Pawl, Retainer pin, and spring
- Constructed of Steel
- Set screw mounts
- Fits .750 Dia Barrels
- Color: Black Phosphate finish
- Material: Stainless Steel (optimal heat and corrosion resistance)
- Mil-Spec Dimensions (consistent gas flow)
- Made in the U.S.
Complete Kit Includes:
- Standard AR-15 Pistol Grip (Black)
- Standard Trigger Guard
- Semi Trigger
- Semi Hammer
- Semi Disconnector
- Semi Selector
- Bolt Catch Spring
- Detent Spring
- Bolt Catch Buffer
- Take Down Detent
- Bolt Catch
- Magazine Catch Spring
- Bolt Catch Roll Pin
- Magazine Catch Button
- Magazine Catch
- Front Pivot Pin
- Hammer Spring
- Trigger Spring
- Pistol Grip Screw
- Pistol Grip Lock Washer
- Selector Spring
- Detent Selector
- Hammer Pin
- Trigger Pin
- Take Down Pin
- Buffer Retainer Pin
- Buffer Retainer Spring
- Disconnector Spring
– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.
– Available in black and flat dark earth (this listing is for black)
– Quick and easy to install
– Provides additional support during firing
– Weighs a scant 5.0 ounces
– ATF approved for pistol use
– Veteran designed, engineered, marketed, and sold
– Made in U.S.A.
"PISTOL BUFFER TUBE DOES NOT CONTAIN DIMPLES"
- Pistol Buffer Tube
- Buffer Spring
- Steel End Plate
- Steel Castle Nut
- CNC machined aluminum buffer tube to fit carbine buffer and spring.
- Hard anodized type III black finish.
- Machined lower slot to accept all end plates and sling mounting accessories.
- Superior Quality Carbine Buffer Spring
- Standard 3 oz buffer Quality Polyurethane Bumper for longer life
- Steel End plate and Castle nut.
- Buffer tubes measure 7"
- Length: 2.6"
- Weight: 2 oz
- Thumb slide mechanism
- Full Windage & Elevation Adjustment (tool included)
- Compatible for 22mm/20mm Weaver Standard Rail
The Rhino R-23™ tactical magwell grip and funnel is designed to significantly improve magazine reload speed and firearm handling. The Rhino™ reduces magazines change times on average by 48% and without ever having to take your eyes off your target. The magazine well grip gives you full control of the weapon whether in CQB or malfunction situations. Made from reinforced polymer, the Rhino magwell ™ attaches to standard AR15/M4 lower receivers without any permanent modification to the weapon.
• 60 degree magazine insertion angle
• Low light/ no light magazine changes
• Fits mil-spec M16, M4,and AR-15 lowers without modification.
• Ultra-light, super strong mil-spec reinforced polymer
• Supports all Magpul PMAGS including Gen 3