SHOP ALL



Product Compare (0)


AR 15 Upper Receiver Bolt Carrier Group W/ Upper Parts kits U1 US Made

AR 15 Upper Receiver Bolt Carrier Group W/ Upper Parts kits U1 US Made

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride PROUDLY MADE IN THE USA! Carrier ·         M16 style (Auto) ·         Machined from 8620 tool steel ·         Heat treated to military specifications Bolt ·         Machined from 9310 tool steel ·         Heat treated to military specifications ·         Shot Peened ·         Ground to meet military required tolerances ·         MPI (Mag Particle Inspected) Gas Key ·         Machined from 4140 ·         Heat treated to military specifications Extractor ·    &nb..

$189.99 $249.99


AR Three-Piece Polymer Angled Foregrip and Back-Up Front and Rear Sights Combo Set

AR Three-Piece Polymer Angled Foregrip and Back-Up Front and Rear Sights Combo Set

Three-Piece Polymer Angled ForegripThree-piece designIncludes an interchangeable finger shelf (allows for a flat surface or finger nub)All mounting hardware includedMaterial: PolymerWeight: 2.53 oz.Length: 5.5 in.Height: 1.94 in.Width, maximum: 1.25 in.Back-Up Front and Rear SightsFeatures    Impact resistant polymer construction    Spring-loaded flip up sight easily activated from either side or by pressing the top    Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.    Protective wings shield the spring-locking A2 front sight postSpecifications    Weight, w/ hardware: 1.2 oz.    Height above rail, stowed: ~0.51 in.    Length, stowed: 2.6 in.    Length, deployed: 1.5 in...

$18.99 $49.99


AR-15 .223/5.56 Bolt Carrier Group- Black Nitride -Bundle: Charging Handle, Ejection Port Cover and Forward Assist

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride -Bundle: Charging Handle, Ejection Port Cover and Forward Assist

PROUDLY MADE IN THE USA! Carrier ·         M16 style (Auto) ·         Machined from 8620 tool steel ·         Heat treated to military specifications Bolt ·         Machined from 9310 tool steel ·         Heat treated to military specifications ·         Shot Peened ·         Ground to meet military required tolerances ·         MPI (Mag Particle Inspected) Gas Key ·         Machined from 4140 ·         Heat treated to military specifications Extractor ·         Machined from 4140 · &nbs..

$119.99 $139.99


AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish with 10 holes Custom Muzzle Brake

AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish with 10 holes Custom Muzzle Brake

AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR 15 1/2X28 Steel 10 holes Custom Muzzle Brake    CNC Machined High Quality Steel    Heat Treated    .223 / 5.56 Nato Shark Muzzle Brake    10  Side Ported     Solid Machined Construction    Black Oxide Finish    Reduced Back Pressure    1/2"x28 Pitch Washer Included    Includes FREE Crush Washer!!..

$79.99 $129.99


AR-15 Eagle Lite Milled Buffer Tube Kit and KAK Shockwave Blade Stabilizer

AR-15 Eagle Lite Milled Buffer Tube Kit and KAK Shockwave Blade Stabilizer

KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - BLACKFeatures:– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.– Available in black and flat dark earth (this listing is for black)– Quick and easy to install– Provides additional support during firing– Weighs a scant 5.0 ounces– ATF approved for pistol use– Veteran designed, engineered, marketed, and sold– Made in U.S.A.Manufacture Description: Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.AR-15 Eagle Lite Milled Buffer Tube Kit Includes: &n..

$84.99 $119.99


AR-15 Ejection Port -Charging Handle and Forward Assist- Bundle -USA

AR-15 Ejection Port -Charging Handle and Forward Assist- Bundle -USA

AR-15 Tactical Charging Handle Assembly With Latch Options: Laser DTOM6061-T6 Charging Handle Body with Steel Latch option Type 3 Hard AnodizedSmoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springThe extended length and large, grooved grip area make charging your rifle easier and quicker.Latch: Ambidextrous / LATCH02 Laser Etched- American Flag- Snake- Don't Tread On Me Fits: AR-15 Rifles AR-15 Ejection Port Cover Assembly- American Flag LaseredEjection Port Cover DoorSteel SpringSteel RodC-ClampReplaces your missing or damaged Ejection Port Cover on your AR-15 RifleLaser Etched- American Flag on both SidesAR-15 Forward Assist Complete Mil Spec AssemblyIncludesplungerforward assist pawlspringretainer pin..

$29.99 $49.99


AR-15 Ejection Port -Charging Handle and Forward Assist- Bundle|DEADPOOL|

AR-15 Ejection Port -Charging Handle and Forward Assist- Bundle|DEADPOOL|

Charging Handle Specification Material: 6061 aluminumFinish: Type III hard-coat anodizedPerfect replacement for any factory charging handleNo gun smith requiredStandard 7075 Latch ZIPPITY AY IM GOING TO BLOW ALL YOU DIRTBAGS AWAY LASER ETCHED LOGO AND TEXTEjection Door Specification Ejection Port Cover DoorSteel SpringSteel RodC-ClampReplaces your missing or damaged Ejection Port Cover on your AR-15 RifleLaser Etched- DEADPOOL TEXT AND LOGO ON ONE SIDE AND 1 SHOT 1 KILL TEXT ON OTHER SIDEForward AssistConstructed from 4150 Steel Includes Plunger, Forward Assist Pawl, Retainer pin, and spring..

$24.99 $59.99


AR-15 Lower Receiver Parts Kit- LPK17-EO

AR-15 Lower Receiver Parts Kit- LPK17-EO

AR-15 Standard Lower Receiver Parts KitComplete Kit Includes:    Pistol Grip AR-15 Right Hand Overmolded Rubber (Black)    Standard Trigger Guard    Semi Trigger    Semi Hammer    Semi Disconnector    Semi Selector    Bolt Catch Spring    Detent Spring    Bolt Catch Buffer    Take Down Detent    Bolt Catch    Magazine Catch Spring    Bolt Catch Roll Pin    Magazine Catch Button    Magazine Catch    Front Pivot Pin    Hammer Spring    Trigger Spring    Pistol Grip Screw    Pistol Grip Lock Washer    Selector Spring    Detent Selector    Hammer Pin    Trigger Pin    Take Down Pin    Buffer Retainer Pin    Buffer Retainer Spring    Disconnector Spring..

$39.99 $59.99


AR-15 Lower Receiver Parts Kit-LPK17-GRIP OPTION

AR-15 Lower Receiver Parts Kit-LPK17-GRIP OPTION

GRIP OPTION: AR-15 Standard A2 Pistol GripMaterial: High Density Fiber PolymerHeight: 4"Weight: 3.0 oz.GRIP OPTION: AR-15 HG-Pistol GripFinger grooves, palm swell and contoured back strap allows for a powerful gripGrip base offers an easily accessible secured storage Compartment for a Small Cleaning Kit or Other ItemsRail Type: Picatinny/WeaverMaterial: High Density Fiber PolymerHeight: 4.3"Weight: 3.8 ozGRIP OPTION: Pistol Grip AR-15 Right Hand Overmolded Rubber BlackInternal Storage Compartment Black FinishFits most M16/AR-15 style riflesIntegral rear upper extension supports the web of your hand subtle finger groovesOvermolded Rubber GripGRIP OPTION: AR-15 Compliant Spur GripStandard dimensions for Mil-Spec AR-15 rifles or pistolsMade for the AR-15 and similiar style riflesPermanently modified replacement partReplaces pistol gripDoes not protrude conspicuously beneath the action of the weaponMolded from Nylon 6/6, impervious to oil and solvetMade in USAAR Platform Hexmag Advanc..

$36.99 $59.99


AR-15 Mil-Spec Upper Receiver -Bundle with Dust Cover - Forward Assist - Charging Handle [CERAKOTE COLOR OPTION]

AR-15 Mil-Spec Upper Receiver -Bundle with Dust Cover - Forward Assist - Charging Handle [CERAKOTE COLOR OPTION]

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedCharging Handle[CERAKOTE] | Robins Egg | Sinper Gray | Red | Sig Pink | FDE |Mil-Spec6061-T6 Billet Aluminum Body with 7075 Latch Black Anodize Finish or Cerakote Color ChoiceSmoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springFits: AR-15 RiflesDust Cover[CERAKOTE] | Robins Egg | Sinper Gray | Red | Sig Pink | FDE |Dust Cover, Spring, and Rod are constructed from 4150 SteelForward Assist[CERAKOTE] | Robins Egg | Sinper Gray | Red | Sig Pink | FDE |Constructed from 4150 Steel Includes Plunger, Forward Assist Pawl, Retainer pin, and spring..

$79.99 $119.99


AR-15 Mil-Spec Upper Receiver -Bundle with Dust Cover - Forward Assist [CERAKOTE COLOR OPTION]

AR-15 Mil-Spec Upper Receiver -Bundle with Dust Cover - Forward Assist [CERAKOTE COLOR OPTION]

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedDust Cover[CERAKOTE] | Robins Egg | Sinper Gray | Red | Sig Pink | FDE |Dust Cover, Spring, and Rod are constructed from 4150 SteelForward Assist[CERAKOTE] | Robins Egg | Sinper Gray | Red | Sig Pink | FDE |Constructed from 4150 Steel Includes Plunger, Forward Assist Pawl, Retainer pin, and spring..

$65.99 $99.99


AR-15 Mil-Spec Upper Receiver Stripped -AR-15 80 Percent Lower Receiver Black Anodized- Made in U.S.A.- Pistol Barrel Option

AR-15 Mil-Spec Upper Receiver Stripped -AR-15 80 Percent Lower Receiver Black Anodized- Made in U.S.A.- Pistol Barrel Option

AR-15 7.5" Barrel .223 Wylde 1:7 Twist = BR-PISMade in the USAFinish: ParkerizedTwist: 1/7Gas Block Diameter: .750"Pistol Length with a gas hole diameter of 0.0761/2"x28 Thread PitchMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress RelievedAR-15 7.5" PISTOL BARREL 300 AAC BLACKOUT = BR377-PBarrel machined  in the U.S chambered in the 300 BLK (AAC Blackout) rifle cartridgeRuns the American 30 caliber slug with an enhanced pistol gas system port. This barrel carries the same tread pitch as the AR-10 barrels 5/8x24 to add a muzzle device.Length: 7.5”Chambered: .300 BLK (AAC Blackout)1:7 Twist .750” gas block diameterMADE IN THE U.S.A Please refer to your local state law before purchasingAR-15 10.5" PISTOL BARREL 300 AAC BLACKOUT 1:7 TWIST = BR10-300BOLength: 10.5”Chambered: .300 BLK (AAC Blackout)1:7 Twist.750” gas block diameterCarbine length with enhanced gas port hole diameter.5/8”X24 Tread Pitch4140 gun quality steel, heat tread ..

$184.99 $269.99


AR-15 Mil-Spec Upper Receiver Stripped and AR-15 80 Percent Lower Receiver

AR-15 Mil-Spec Upper Receiver Stripped and AR-15 80 Percent Lower Receiver

AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight stripped Upper Receiver Material: Aircraft grade AluminumFinish: Black AnodizedAR-15 Mil-Spec Lower Receiver 80%- Made in U.S.AItem DetailsCartridge: Multi-caliber Finish: Black Anodized Style: 80% drilled Make: AR-157075-T6 aluminum, for a superior custom buildThis is NOT an FFL item and requires machining to completerequires completion by the userOperations left to be completed include fire control/trigger group milling, trigger pin, hammer pin, trigger slot, and the safety selector holeMade in the USA..

$113.99 $113.99


AR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- Side Charging Handle

AR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- Side Charging Handle

Side Charging Handle (Bolts on Directly to Bolt Carrier) IncludedBolt Carrier Group Included Perfect for Rear Scope Clearance Upper Receiver Type: Flat Top Compatible with: AR-15/M16Material: Forged 7075 Aluminum Finish: Black- Type III, Hard Anodizing M4 Feed Ramps: Yes Bolt Carrier Specification Slab Side Nitride Bolt Carrier with Properly Staked Gas key Bolt is MPI tested with a Phosphate FinishSide Charging Handle is Steel with Knurling for more purchase. ..

$199.99 $299.99


AR-15 Standard Lower Build Kit

AR-15 Standard Lower Build Kit

M4 Buttstock & Buffer Tube Kit:Collapsible StockMoulded from Reinforced Plastic CompositeMetal Sling Loop/Attachment installedIncludes all necessary parts to mount to your lower receiver.Adjustable Mil-Spec StockMil-Spec 6 Position Buffer Tube / Receiver Extension (Machined from T6 6061 Aluminum)Type III Hardcoat Anodized - Black3.0oz Buffer AssemblyCarbine Action SpringReceiver End PlateCastle NutAR-15 Enhanced Lower Receiver Parts Kit:Complete Kit Includes:  Standard AR-15 Pistol Grip (Black)    Standard Trigger Guard    Semi Trigger    Semi Hammer    Semi Disconnector    Semi Selector    Bolt Catch Spring    Detent Spring    Bolt Catch Buffer    Take Down Detent    Bolt Catch    Magazine Catch Spring    Bolt Catch Roll Pin    Magazine Catch Button    Magazine Catch    Front Pivot Pin    Hammer Spring    Tri..

$69.99 $119.99


AR-15 Super Keymod Free Float HandGuard 223 556 Steel Barrel Nut

AR-15 Super Keymod Free Float HandGuard 223 556 Steel Barrel Nut

Available in 10",12", 15"Color:  BlackMaterial:   6061 T6 AluminumMonolithic Top RailUp to 2 FREE 3" Removable KeyMod Rail SectionsWill Accommodate 99.9% of all micro low profile gas blocksUltra Lightweight but Heavy Duty Design.Barrel Nut- (Maximum Inside Dimensions of Barrel Nut is 1″)Barrel nut is intended for .223/5.56 300 blackout etc… RiflesRail will not Fit .308 Caliber RiflesInside Diameter: 1.33"Keymods at 3, 6 and 9 o’clock positions PackageOne Black Anodized El Keymod RailSTEEL Barrel Nut6 Screws to securely fasten the  rail to the Proprietary Barrel nut.Up to 2 FREE Removable KeyMod Rail Sections with all mounting hardware.2 3'' Keymod Rail Section (7 Slots)2 Allen wrenches2 extra screws in case you misplace one.NOT INCLUDED BUT NEEDED TO COMPLETE THE INSTALLATION OF THIS RAIL -10" CRESCENT WRENCH -MEDIUM STRENGTH THREAD LOCKER  ..

$39.99 $69.99


AR-15 Tactical Muzzle Brake Recoil Compensator 1/2x28 Thread

AR-15 Tactical Muzzle Brake Recoil Compensator 1/2x28 Thread

Unique custom tactical design dramatically reduces felt recoil.45 Degree rearward angle produces an Anti-Recoil effect helping to stabilize the rifle with every shot.Vertical ports provide a genuine reduction in muzzle rise.The result allows the shooters sights to remain on target or realigned quickly providing faster accurate follow up shots.Specifications:Material: Mil-Spec AluminumWeight: 2.6 Oz.Length: 2 7/8"Height: 1"Features:6 ports for linear and climb recoil reductionMil-spec Parkerized Black FinishPitch Thread 1/2x28Fits: .223/5.56..

$89.99


AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel Nut

AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel Nut

Constructed of 7075 T6 AluminumIncludes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiver7075 T6 Aluminum2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Available length: 7", 10", 12", 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"..

$36.99 $89.99


AR-Platform Rise Armament Super Sporting Trigger

AR-Platform Rise Armament Super Sporting Trigger

AR-Platform Rise Armament Super Sporting Trigger Single-stage trigger systemDrop in Trigger3.5-lb. pull weightClean break with a short resetBlack 8625 hard coat anodized aluminum cassetteComfortable, rounded triggerUnit weight: 2.6 oz.Manufactured according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirementsCNC machined from high-grade, heat-treated tool steel and aluminumFits most .308 and .223 AR style platforms (Not for use in Sig MPX)Self-contained design makes it easy and quick to install with no fine-tuning neededAnti rotaition pins recommended To view installation instructions, watch our tutorial here or read our tutorial hereNote: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty.U.S. Patent No. 7,293,385Anti Walk Pins NOT INCLUDED ..

$129.00


AR15 Upper Receiver Bolt Carrier Group W| Upper Parts kits U2 Made IN USA

AR15 Upper Receiver Bolt Carrier Group W| Upper Parts kits U2 Made IN USA

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride PROUDLY MADE IN THE USA! Carrier ·         M16 style (Auto) ·         Machined from 8620 tool steel ·         Heat treated to military specifications Bolt ·         Machined from 9310 tool steel ·         Heat treated to military specifications ·         Shot Peened ·         Ground to meet military required tolerances ·         MPI (Mag Particle Inspected) Gas Key ·         Machined from 4140 ·         Heat treated to military specifications Extractor ·     &..

$189.99 $249.99


Assembled AR-15 Mil-Spec Upper Receiver |Made in U.S.A.|

Assembled AR-15 Mil-Spec Upper Receiver |Made in U.S.A.|

High quality and lightweight Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black AnodizedINCLUDED :     FORWARD ASSIST    DUST COVER      OPTION:AR-15 .223/5.56 Bolt Carrier Group- Black NitridePROUDLY MADE IN THE USA!CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedGround to meet military required tolerancesMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treatGround to meet military required tolerances..

$69.99 $109.99


KAK Industries Shockwave Blade and EL Buffer Tube Kit

KAK Industries Shockwave Blade and EL Buffer Tube Kit

KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - BLACKFeatures:– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.– Available in black and flat dark earth (this listing is for black)– Quick and easy to install– Provides additional support during firing– Weighs a scant 5.0 ounces– ATF approved for pistol use– Veteran designed, engineered, marketed, and sold– Made in U.S.A.Manufacture Description: Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation.AR-15 .223/5.56 Complete PISTOL BUFFER TUBEIncludes:    ..

$65.99 $99.99


New Style 150 Lumen Rifle Shotgun LED Compact Flashlight Picatinny Wire Switch

New Style 150 Lumen Rifle Shotgun LED Compact Flashlight Picatinny Wire Switch

    Made to withstand heavy recoil    Aluminum Body / Matt Black Finish    Ring mount attaches to weaver/picatinny mounts/rail systems / For any 20mm Wide rails    150 Lumens Cree LEDs give you 50x longer life span than standard flashlight bulbs and 10x more battery life    On/Off activation either via switch on end cap or with remote curly cord activation switch    Length: 3.62 "    Weight: 3.5 Oz    Includes:        Batteries ( CR123A x 1 ) Included        Weaver / Picatinny Ring mount        Curly cord switch , regular cap switch and flashlight        allen Wrench..

$15.95 $22.95


Premium Flip up Front Rear Iron Sight Set Dual Diamond Shaped Aperture BUIS Black

Premium Flip up Front Rear Iron Sight Set Dual Diamond Shaped Aperture BUIS Black

Flip up Front & Rear Iron Sight SetMachined from light weight and durable 6061 aircraft grade AluminumDiamond shaped A2 style aperture, allowing for quick and accurate target acquisitionSecure ball bearing pivot detent locking mechanismLow profile folding designRear sight Windage adjustable with click knobFront sight A2 post elevation adjustableAmbidextrousNon-rust hard anodized finishCompatible with most Picatinny / Weaver rails..

$24.99 $39.99


USA MADE .223/5.56/300 BLK Bolt Carrier Group - Nitride

USA MADE .223/5.56/300 BLK Bolt Carrier Group - Nitride

AR-15 .223/5.56 Bolt Carrier Group- Black Nitride (Made in USA)CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treat ..

$79.99 $129.99


USA MADE .223/5.56/300 BLK NICKEL BORON Bolt Carrier Group - NiB

USA MADE .223/5.56/300 BLK NICKEL BORON Bolt Carrier Group - NiB

MADE IN THE U.S.A Heat treated, shot peened, relief cut, and machined to exact mil spec dimensions.Nickel boron coated to provide increased lubricity and much greater wear resistance than other finishes. The coating makes easier cleaning Bolt Features Carpenter 158 Steel Heat treated Shot Peened MPI Tested MaterialNickel Boron CoatedBolt Carrier Features 8620 SteelNickel Boron CoatedNickel Boron Coated BoreFull Auto M-16 Style with more mass for mass ..

$119.99 $129.99


150 Lumen Tactical Flashlight Quick Detach

150 Lumen Tactical Flashlight Quick Detach

Uses 1 CR2 Lithium Type Battery  (Included)Quick release mount that will fit most Weaver picatinny type railsThis model will fit most mid size and compact semi automatic pistol Push button rubber ambidextrous switch on flashlight with ultra sensitive switch from high beamOrange peel chrome deflector to provide the most light output.3 Watt bight CREE LED with 150 lumen peak output.Material: Aircraft Grade AluminumFinish: Black anodized ..

$23.99


3 - 9x Rifle Scope

3 - 9x Rifle Scope

Specification.3-9x42EG Riffle ScopeScope Reticle: Mil-Dot (Green/Red Illuminated)Magnification: 3x-9xObjecitve Dia. (mm): 42FOV (Feet at 100 Yards): 36.8’ – 12.0Length Scope: 8.25”Weight Scope: 17.02Includes batteries Fully multi coated lenses Integrated slant cut sun shade Black anodized exterior finish Provided with quick release and one left sided picatinny /weaver slotIncludes: 1 Allen key and micro fiber cleaning cloth     This 3-9x42mm riffle scope features unsurpassed light transmission, uncompromising mechanical performance and unbeatable optical clarity. Magnification is from 3 times up to 9 times. Green and red illuminations with 5 brightness adjustments for this scope. Waterproof and fog proof, and quick release allows you to attach and detach easily. ..

$82.99


5 1/4" DOUBLE ACTION AUTOMATIC TACTICAL KNIFE

5 1/4" DOUBLE ACTION AUTOMATIC TACTICAL KNIFE

Brand: Top Quest  Handle Material: CNC milled aluminumHandle type: Straight with finger jimping all aroundBlade material: 440 stainless steelOverall length: 5 ¼”Blade length: 1 7/8”Handle length: 3 ½”Blade edge: Plain edgeBlade Shape: Drop point daggerLock type: Double action OTFStyle: Automatic OTFOpen system: Trigger switch automatic OTFBelt clip: NoneSheath: NoneAvailable  Colors: BLACK &  RED Additional features: Features a key-chain loop, quick and tactical trigger double action out the front blade.    Before making your purchase please refer to your local state law  ..

$10.99


5" MONEY CLIP DAGGER KNIFE

5" MONEY CLIP DAGGER KNIFE

Brand: Top QuestColor:  Mirror finish stainless steelHandle Material:  Stainless SteelHandle type: Clip provides handleBlade material: 440 stainless steelOverall length: 5”Blade length: 2”Handle length: 3”Blade edge: Plain edge to a pointBlade Shape: Drop to a point  Lock type: Liner lockStyle:  Knife rotationOpen system: Physical thumb rotationBelt clip: None- Has clip for moneySheath:  NoneAdditional features: Money clip with built in knife    Before making your purchase please refer to your local state law ..

$10.99


6 1/2" SPEED ASSIST FOLDING KNIFE

6 1/2" SPEED ASSIST FOLDING KNIFE

Brand: Top Quest Color: Black and raw Stainless steel Handle Material: ABS ridged handle composite Handle type: Pocket knife curved for hand palm Blade material: 440 Stainless Steel Overall length: 6 ½”   Blade length: 2 ¾” with thumb jimping for support Handle length: 3 ½” Blade edge:  Plain edge Blade Shape:  Drop point Lock type:  Liner lock Style:  Speed assisted pocket folding knife Open system: Speed assist Belt clip: None Sheath: None   Additional features:  Features a proprietary built compartment with a Ferro-rod for fire starter. Also has a key-chain lanyard Before making your purchase please refer to your local state law ..

$10.99


7” Necklace knife with ABS sheath

7” Necklace knife with ABS sheath

Brand: Top Quest Color:  Black blade and sheath with cord made handle Handle Material: 440 stainless steel Handle type: Contour 3 finger notches Blade material: 440 stainless steel Overall length: 7” with no sheath 7 ½” with sheath Blade length: 3 ½” Handle length: 3 ½” Blade edge:  Plain to a point Blade Shape: Drop point dagger Lock type: None Style: None folding  Open system: Fixed blade Belt clip: ABS sheath with belt clip behind  Sheath:  ABS Additional features:  Has necklace cord and extra cord for handle comfort.  Before making your purchase please refer to your local state law ..

$10.99


8” THE SILVER WIDOW KNIFE

8” THE SILVER WIDOW KNIFE

Brand: STEC Color: Black blade and red laser etched spider and web Handle Material: Aluminum Handle type: Straight with thumb jimping for support Blade material: 440 Stainless Steel Overall length: 8” Blade length: 3 ½ “ Handle length: 4 ½ “ Blade edge: Partial serration and finish with a plain edge Blade Shape: Drop point Lock type: Liner lock Style: Spring assisted Open system: Spring assisted opening Belt clip: Only on the right side (not ambidextrous) Sheath: None Additional features:  Glass breaker and seatbelt cutter. Color vary slightly from picture. Before making your purchase please refer to your local state law ..

$15.99


9'' FIXED BLADE WITH ABS SHEATH AND HANDLE

9'' FIXED BLADE WITH ABS SHEATH AND HANDLE

Weight: 7.0 oz Color: Gray steel blade with black handle and sheath Handle Material: ABS Handle type: 2 piece hex pattern scale with 3 deep indents on each side Blade material: Premium grade steel Overall length: 9¼” blade/ 9¾ with sheath   Blade length: 4 ½” with a peaked spine for thumb support Handle length: 4” Blade edge: Plain Blade Shape: Dagger point Lock type: Fixed blade Style: Fixed survival/ hunting Open system: Fixed blade Belt clip: None Sheath: ABS waist contour sheath brace (snug fit to secure knife) Waist brace could be removed to use as a large neck knife (adding para-cord to circle sheath rivets) Before making your purchase please refer to your local state law  ..

$21.99


9MM BARREL PLATFORM

9MM BARREL PLATFORM

16"Profile/contour: SOCOM Chambered: 9x19 Luger                                                                           1:10 Twist All NFA rules apply 4150 carbon steel heat treated  Muzzle Threads: ½-36 Parkerized Finish Fits mil-spec receivers Can be used on Colt and Glock platforms AR-9 Using the dependable blow back design (not drilled gas port for barrel)  Made in the U.S.A ..

$133.95


9” FIXED BLADE WITH ABS SHEATH AND HANDLE

9” FIXED BLADE WITH ABS SHEATH AND HANDLE

Weight: 10.2 oz Color: Gray steel blade with black handle and sheath Handle material: ABS Handle type: Wrapped around ABS with serrations on critical points Blade material: Premium grade steel Overall length: 9” blade / 9¾ with Sheath   Blade length:4” with slight spine jimping ( blade is 3.5mm of thickness) Handle length: 4¾” Blade edge: Plain no serration Blade shape: Drop point Lock type: Fixed blade Style: Fixed survival Open system: Fixed Belt clip: None Sheath: ABS waist contour sheath (snug fit to secure knife) Waist brace could be removed to use as a large neck knife (adding para-cord to circle sheath rivets)  Before making your purchase please refer to your local state law  ..

$21.99


AK-47 ADJUSTABLE ACCU GRIP (BLACK)

AK-47 ADJUSTABLE ACCU GRIP (BLACK)

This grip is designed to replace the stock ‘one-size-fits-all’ grip ACCU-GRIP is an adjustable 2–piece pistol grip that is very simple to install and adjusts with ease The standard trigger length of an AK-pattern rifle is just 2.375 inches, but with the ACCU-GRIP it can be extended out to a full 3.25 inches ACCU-Grip fits all original type stamped metal military (Soviet Bloc/Chinese Mil-spec and commercial stamped metal AK Soviet/Chinese Mil-spec) lowers-but will NOT FIT MILLED AK receivers  Material: Long poly (Zytel Resin) and glass fiber stands making it incredibly tough ..

$42.95


AR 15 Basic Upper Receiver Components

AR 15 Basic Upper Receiver Components

AR-15 5.56 NATO 16" Inch Rifle Barrel 1:7 Twist Parkerized FinishChamber: 5.56/.223Length: 16"Twist Rate: 1:7Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedAR-15 .223/5.56 Bolt Carrier Group- Black NitridePROUDLY MADE IN THE USA!CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedGround to meet military required tolerancesMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treatGround to meet military required tolerancesAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High qu..

$226.99 $299.99


AR JMT SABER SINGLE STAGE DROP IN TRIGGER

AR JMT SABER SINGLE STAGE DROP IN TRIGGER

JMT SABER SINGLE STAGE DROP IN TRIGGER With a fast reset, a smoother, crisper, lighter trigger pull, the single-stage trigger group is easy to install. KEY FEATURESSingle-stage3.5- 4.0 lb. pull weightQuick reset for faster response time between shotsLightened trigger pull with super-crisp release to improve accuracyCurved skeleton trigger function and comfortSelf-contained design makes it easy and quick to install with no fine-tuning neededQuality 17-4 Stainless steel hammer, trigger and disconnectPrecision CNC and EDM machined from high-grade 6061-T6 aluminum and 17-4 ph SSContained in JMT’s signature metallic silver anodized aluminum housingNote: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty.Anti-Rotation Pins Included ..

$119.99 $129.99


AR Platform Hexmag Advanced Tactical Grip

AR Platform Hexmag Advanced Tactical Grip

The new Advanced Tactical Grip from Hexmag is the latest AR-15 accessory to hit the market. This pistol grip features Hexmag’s signature hexagonal pattern for superior grip but can also be outfitted with Hexmag’s Grip Tape. The Advanced Tactical Grip goes beyond style and great looks, it features X-Tech tactical’s patented 3 position adjustment so it can be set at 17,25, and 33 degrees. If you have a short barreled rifle or a pistol you can set the grip at 17 degrees if you are maneuvering in tight spaces. If you have a regular carbine length AR you can set it at 25 degrees, or if you need a more relaxed position that is set further back you can set it to 33 degrees. This is all done by loosening the screw a few turns with the supplied Allen wrench and resetting the grip on the mount to your desired angle.Made in the USA from fiber reinforced polymer.17 degree grip angle is best suited for AR pistols and close range operation25 degree setting is the standard pistol grip angle33 degree ..

$24.99


AR Platform Iron Sight

AR Platform Iron Sight

Front Sightno levers or spring to fumble withdeployment of the sight under stress is easy making it the perfect sight for you. robust cross locking system ensures your sights will remain up and zeroed in To fold the battle sight simply press the release button located on the left side of the sightfeatures a zero-canting attachment system  Aircraft Aluminum construction and black anodized Rear Sight Constructed of aircraft grade aluminum Lightning fast target acquisition Matches perfectly with A2 front sights2 Setting Folding ApertureBlack anodized This sight is not spring loaded but will stay locked upright. Audible click for quick zeroApertures center your eyes instantly and effortlessly providing a clear target picture  ..

$32.99


AR Platform Iron Sight and AR-15 Cartridge Laser Bore Sight

AR Platform Iron Sight and AR-15 Cartridge Laser Bore Sight

AR-15 Cartridge Laser Bore SightMaterial: High Quality BrassLaser Wavelength: 632-650nmLED Type: Visible Red LaserMaximum Output Power: <5 mwSighting Range: 20-30yardsDot Size: 1.5" @ 100 ydIncluded Batteries: 3 x AG3 or LR411 Button CellFits .223 Cartridge.Sighting or zeroing in your iron sights, red dots, or scopes quickly and easily.AR Platform Iron SightFront Sightno levers or spring to fumble withdeployment of the sight under stress is easy making it the perfect sight for you. robust cross locking system ensures your sights will remain up and zeroed in To fold the battle sight simply press the release button located on the left side of the sightfeatures a zero-canting attachment system  Aircraft Aluminum construction and black anodized Rear Sight Constructed of aircraft grade aluminum Lightning fast target acquisition Matches perfectly with A2 front sights2 Setting Folding ApertureBlack anodized This sight is not spring loa..

$39.99


AR Platform Roll Pin Holder Tools

AR Platform Roll Pin Holder Tools

These tools are designed to securely hold a roll pin to start the pin installation in any difficult situation when you want to keep your fingers away. This tool could be used to assist in modification of gas block or charging handles. Convenient and reliable tool made of high quality steel machine to exact roll pin specifications. A tool you must have if you plan on working on your firearms. Material: High Quality Gun Steel Sizes: 7/32”, 3/16”, 5/32” and 1/8” Could be used on any AR Platform ..

$16.99


AR- Monsterman Grip

AR- Monsterman Grip

The MMG-AR is a patented grip designed to replace the pistol grip on an off list AR-15 type rifle allowing users to keep their magazines detachable in California. Users must also remove all other banned features on semi-auto rifles with detachable magazines doing so making the rifle featureless. Specification Material- Glass fiber filled NylonUses same screw as mil spec pistol grips10 Years in business California and New York Please take off inside filler to expose the pistol grip screw hole Please educate yourself in your local laws Legal Information applied to Monsterman Grips ..

$44.99


AR- TCB Extened Magazine Release

AR- TCB Extened Magazine Release

The TCB-31™ is an extended mag release designed to improve the functionality and ergonomics of the factory button. The TCB™ increases the size of your factory button by 263% making it easier and faster to perform magazine changes. The TCB - extended mag release size and ergonomic design enables button engagement without changing your grip position. Made from 7075 T6 Aluminum and Type III black hard anodized, the TCB™ extended mag release is compatible with 5.56/.223 and 7.62/.308 receivers. Check all state and local laws before installing any products!All mounting hardware, base and button included• Improved magazine changes• 263% larger button• Ergonomic design• 7075 T6 Aluminum and Type III black hard anodized • Fits AR 5.56/.223 and 7.62/.308• Made in U.S.A..

$21.99 $29.99


Showing 1 to 75 of 887 (12 Pages)