AR-10 PARTS


Show:
Sort By:

Low Profile Steel Micro Gas Block - Clamp-on Design

    Low Profile Steel Micro Gas Block - Clamp-on Design    Adjustable Clamp-on design holds firmly to barrel without marring or damaging it    Low-profile to fit under most commercially available handguards.    Fits barrels with a 0.750" Diameter    Material: Hardened Steel    Finish: Smooth Matte Black    Length: 1"    Width: 1"    Includes Screws and Allen wrench..

$24.99 $15.99

AR-15 Nitride Carbine Gas Tube

Nitride Carbine Gas Tube This gas tubes is made out of case hardened, heat treated Mil-Spec 304 stainless steel and finished with a Nitride Quenched for greater heat disbursement, corrosion resistance, and lower reflection. Nitride provides supreme properties that are ideal when you shoot cheap surplus corrosive ammunition. Gas Tube DetailFinish: Nitride (Non Reflective)Material: 304 Heat treated and Case hardened Stainless SteelLength: Carbine  9.875"..

$15.99 $10.99

AR-15/AR-10 Forend Grip

AR-15/AR-10 Forend GripBlack anodizedLightweightLength: 4.5 inWidth: 15 mmWeight: 1.5 ozM-LOK compatible Hardware included..

$26.99 $16.99

AR-Platform Rise Armament Super Sporting Trigger

AR-Platform Rise Armament Super Sporting Trigger Single-stage trigger systemDrop in Trigger3.5-lb. pull weightClean break with a short resetBlack 8625 hard coat anodized aluminum cassetteComfortable, rounded triggerUnit weight: 2.6 oz.Manufactured according to strict AS9100 aerospace requirements, which are more stringent than standard gun manufacturing requirementsCNC machined from high-grade, heat-treated tool steel and aluminumFits most .308 and .223 AR style platforms (Not for use in Sig MPX)Self-contained design makes it easy and quick to install with no fine-tuning neededAnti rotaition pins recommended To view installation instructions, watch our tutorial here or read our tutorial hereNote: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty.U.S. Patent No. 7,293,385Anti Walk Pins NOT INCLUDED ..

$129.00

AR10 COMPLETE STANDARD LOWER PARTS KIT (LPK17-308)

AR10/308 lower parts kit helps you to build a custom .308 AR from the ground up Mil- spec dimensions and coating ensure the highest quality and correct component interfaceFeatures:    AR10/SR25 Complete Lower Parts KitIncludes:Takedown/pivot SpringTakedown/pivot detentTrigger/hammer pin.308 Takedown pin.308 Pivot pin.308 Bolt CatchBolt Catch SpringBolt Catch BufferBolt Catch Roll pinSafety SelectorSafety Selector SpringSafety Selector DetentBuffer RetainerBuffer Retainer SpringA2 Pistol GripPistol Grip ScrewPistol Grip Lock WasherTrigger SpringHammer SpringDisconnector SpringMagazine Catch BodyMagazine Catch SpringMagazine Catch ButtonHammerTriggerDisconnector..

$69.99 $59.99

Skeletonized Forend Grip

Skeletonized Forend GripBlack anodizedLightweightSkeletonized designLength: 5.5 inWidth: 15.8 mmWeight: 1 0zM-LOK and Keymod CompatibleHardware included..

$25.99 $17.99

15" Black Nitride Gas Tube - Rifle Length

Material: Black Nitride Gun Quality Steel (optimal heat and corrosion resistance)Mil-Spec Dimensions (consistent gas flow)Length: 15.125"..

$15.99 $11.99

AR Adjustable Accu Grip (BLACK/DESERT SAND/DARK EARTH)

Accu-Grip’s unique adjustable grip for the trigger finger hand makes for much more effective trigger reach Trigger control and results in greatly improved shooter accuracy.Easy InstallAvailable:BlackDesert SandDark EarthColor may vary slightly from picture posted...

$36.99

AR AMBIDEXTROUS DOUBLE LOOP AND SLING END PLATE

Double loop hole and lanyard for fast convenient of comfort for operator  Heat treated high quality steelBlack phosphate semi gloss finish.Will fit commercial and mil spec buffer extension1 oz ..

$8.99

AR-10 .308 / 7.62 Rifle Length Buffer 5.6 oz. (Black)

AR-10 .308 / 7.62 Rifle Length Buffer 5.6 oz.Helps to reduce felt recoilProvides smoother function for faster follow-up shotsDrop-in installationUses rifle length recoil springFits Fixed Position A1/A2 StocksLength: 5.25"Weight: 5.6 oz...

$19.98

AR-10 .308 A1/S2 Skullaton MBA-2 Rifle Length Fixed Stock Assembly

Skullaton MBA-2 Rifle Buttstock LUTH-ARLight weight stock to mount to a rifle (A2 round standard tube)- This is our skullaton fixed stock.Fits most .223 and .308 AR style riflesSuper strong glass filled NylonComes with A2 buttstock screw to connect to A2 standard buffer tubeIncorporates castle nun and lock ring in designErgonomicTHIS MODEL WILL NOT FIT ON COLLAPSIBLE 6 POSITION STOCK, ONLY ON A1 OR A2 RIFLE BUFFER TUBES AR-10 .308 A1/A2 Rifle Length Fixed Stock Buffer Tube AssemblyIncludes: Fixed Position Buffer Tube Rifle Length Material: High quality Aluminum Finish: Smooth Matte Black Buffer Spring Rifle Length Pre-Loaded (39 Coils) Finish: Matte Black Buffer Rifle Length 5.5 oz...

$97.99

AR-10 .308 Keymod Skeleton Ultra Light Rail System

10",12",15" Length Handguard RailSolid 6061 AluminumSuper Lightweight designpicatinny  and skeleton rail Keymod Top RailBeginning of rial has 1.7" (4 slot) pica-tinny then the end 2.5" (6 slot) picatinny  rail. One-Piece Free Float Design and ConstructionIncludes end-cap Includes barrel nut and necessary hardwareFinish: Black Anodized Height: 2.167Width: 1.811Inner Diameter: 1.570"Weight: 10.4 ozCompatible with DPMS Style Gen 1 .308 Upper Receivers\ ..

$75.99

AR-10 .308 Steel Shark Muzzle Brake|American Flag Lazer

CNC Machined High Quality SteelHeat Treated.308 7.62X51 Shark Muzzle BrakeSide Ported And Ported On TopSolid Machined ConstructionBlack Oxide FinishReduced Back Pressure5/8X24 Pitch Washer IncludedWraps around your threaded barrel and threads on 5/8X24 thread pitch.Include FREE Crush Washer!!AMERICAN FLAG LASER ON THE TOP AND BOTTOM OF MUZZLE BRAKE. ..

$29.99

AR-10 .308 Tactical Charging Handle Assembly With Latch Options

Mil-SpecAircraft AluminumBlack Oxide FinishSmoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springFits: .308 RiflesLatch Option: Ambidextrous/LATCH02, Oversized X Pattern/LATCH, Oversized Solid Pattern/LATCH05..

$16.99 $13.99

AR-10 16" 1:10 Twist | Mid-length Gas System Barrel | USA MADE

Specifications:Length: 16”Chambered in .3081:10 Twist Rate.750” gas block diameterMid-length gas systemProfile: Heavy Barrel 0.082 gas hole diameter5/8x24 Tread Pitch4150 Chrome Moly Vanadium Finish: ParkerizedMade in the U.S.A..

$118.99 $99.99

AR-10 18" 1:10 Twist |Mid-length Gas System Barrel Socom | USA MADE

Specifications:Length: 18”Chambered in .308 Winchester 1:10 Twist Rate.750” gas block diameterMid-length gas systemProfile: SOCOM 0.082 gas hole diameter5/8x24 Tread Pitch4150 Chrome Moly Vanadium Finish: ParkerizedMade in the U.S.A..

$102.99

AR-10 18" 1:10 Twist |Mid-length Gas System Barrel Socom Nitride | USA MADE

Length: 18”Chambered in .308 Winchester1:10 Twist Rate.750” gas block diameterMid-length gas systemProfile: SOCOM Black Nitride 0.082 gas hole diameter5/8x24 Tread Pitch416R Stainless Steel Finish: Black Nitride Made in the U.S.A..

$129.99 $109.99

AR-10 18" 1:10 Twist |Mid-Length Gas System Barrel Socom Stainless Steel

Length: 18”Chambered in .308 Winchester 1:10 Twist Rate.750” gas block diameterMid-length gas systemProfile: SOCOM0.082 gas hole diameter5/8x24 Tread Pitch416R Stainless Steel Finish: RAWMade in the U.S.A..

$129.99 $109.99

AR-10 20" 1:10 Twist |Rifle-length Gas System Barrel Heavy Stainless Steel | USA MADE

Specifications:Length: 20”Chambered in .308 Winchester1:10 Twist Rate.750” gas block diameterRifle-length gas systemProfile: Heavy Barrel 0.086 gas hole diameter5/8x24 Tread Pitch416R Stainless Steel  Finish: RawMade in the U.S.A..

$120.99

AR-10 24" |Rifle-length Gas System Barrel Straight Flutes | USA MADE

Specifications:Length: 24”Chambered in .308 Winchester  1:10 Twist Rate.750” gas block diameterRifle-length gas systemProfile: Heavy Barrel with Straight Flutes 0.093 gas hole diameter5/8x24 Tread Pitch416R Stainless Steel Finish: RAWMade in the U.S.A..

$149.99

AR-10 7.62X51 308 Shark Stainless Steel Muzzle Brake

CNC Machined High Quality SteelHeat Treated 7.62X51 308 Nato Shark Muzzle BrakeSide Ported And Ported On TopSolid Machined ConstructionFinish: High Polish Stainless Steel Reduced Back Pressure5/8X24 Pitch Washer IncludedWraps around your threaded barrel and threads on 5/8X24 thread pitch.Include FREE Stainless Steel Crush Washer!! ..

$27.99

AR-10 Black Nitride- Bolt Carrier Group (Made in USA)

Profile: Full Mass M16 Style (Full Auto)Caliber: .308 Winchester CNC Machined Heat Treated Carpenter Steel Shot Peened MPI Bolt- 9310 Carpenter Grade Steel 8620 Gas Carrier Finish: Black Nitride DPMS Compatible ..

$199.99 $144.99

AR-10 Circle Ports Quad Rail Handguard

AR-10 one-piece slim style free-float design is constructed of T6 6061 Features four Picatinny accessory rails for unlimited customization  Inner Vertical Diameter : 2.0"Inner Horizontal Diameter : 2.00"Outside Vertical Diameter: 2.49"Outside Horozontal Diameter: 2.49"Length:10"-12”CNC Machined Circle Ports to Minimize WeightAluminum Barrel Nut with outer retention ringColor: BlackMaterial: 6061 Aluminum  ..

$49.99

AR-10 LOWER RECEIVER PARTS KIT ( NO FIRE CONTROL GROUP AND PISTOL GRIP)

Proprietary to AR-10 platform, has longer take down and pivot pins then the standard AR-15This kit includesBolt catch assembly with plungerSpring with the AR-10 hex screwMagazine Catch Assembly - Black-magazine catch, magazine catch spring and magazine button.Bolt Catch Assembly - Black-bolt catch, bolt catch spring and plunger with hex screw.Buffer Retainer & Retainer SpringSingle Safety Selector Lever with spring and detentTrigger Pin Hammer Pin Pivot and take Down Pins assembly- Longer .308 Pivot and Take down Pins and both Springs and Detents ( NO FIRE CONTROL GROUP AND PISTOL GRIP)Fits: AR-10 DOES NOT INCLUDE, FIRE CONTROL GROUP AND PISTOL GRIP WITH SCREW, ALSO NO TRIGGER GUARD..

$35.99

AR-10 LR308 Upper Receiver DPMS Low Profile

Compatible with LR-308 DPMS Paterns and Most Other DPMS Pattern Lowers Low Profile Tang6061 Aluminum1913 Picatinny Rials are Mil-Spec Finish: Type III Class 2 Hard Coat Anodized Finish This Upper Will Work With Most Any Standard Quad Rail or Handguard, But May Not Fit Rails With Anti Walk or Anti Rotation Tabs. ..

$119.99

AR-10 PMAG10 LR/SR

The Magpul PMAG® M3 7.62 x 51 NATO 10-Round Magazine is designed for use with most AR-10 rifles and holds up to 10 rounds of 7.62 x 51 NATO (.308 Winchester) caliber cartridges. Impact- and crush-resistant polymer construction. Anti-tilt, self-lubricating follower. Includes an impact/dust cover. Made in USA. Features and Benefits Designed for use with most AR-10 platform riflesHolds up to 10 rounds of 7.62 x 51 NATO (.308 Winchester) caliber cartridgesImpact- and crush-resistant polymer constructionStainless-steel springAnti-tilt, self-lubricating followerFlared floor-plateIncludes an impact/dust cover What's in the Box Magpul PMAG® M3 7.62 x 51 NATO 10-Round MagazineImpact/dust cover..

$19.99

AR-10 Tactical Charging Handle Assembly With Latch Options: Laser DTOM

Mil-SpecAircraft AluminumBlack Oxide FinishSmoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springFits: .308 RiflesLatch Option: Ambidextrous/LATCH02, Oversized X Patern/LATCH, Oversized Solid Patern/LATCH05Laser Etched- American Flag- Snake- Don't Tread On Me ..

$19.99 $15.99

AR-10/.308 PIVOT PIN AND TAKE DOWN PIN WITH AR 10 BOLT CATCH .308 KIT

Standard MIL-SPEC steel pinDesign to hold upper and lower togetherAR-10 BOLT catchIncludes:1X-AR10 PIVOT PIN1X-AR-10 TAKE DOWN PIN1X-AR-10 BOLT CATCH ..

$30.99

ARMASPEC TCB-31 Extened Magazine Release |Made in U.S.A

The TCB-31™ is an extended mag release designed to improve the functionality and ergonomics of the factory button. The TCB™ increases the size of your factory button by 263% making it easier and faster to perform magazine changes. The TCB - extended mag release size and ergonomic design enables button engagement without changing your grip position. Made from 7075 T6 Aluminum and Type III black hard anodized, the TCB™ extended mag release is compatible with 5.56/.223 and 7.62/.308 receivers. Check all state and local laws before installing any products!All mounting hardware, base and button included• Improved magazine changes• 263% larger button• Ergonomic design• 7075 T6 Aluminum and Type III black hard anodized • Fits AR 5.56/.223 and 7.62/.308• Made in U.S.A..

$29.99 $21.99

Bullet Button Tool and Bullet Button

Bullet Button Wonder Tool - California Compliant Magazine Lock ToolCompatible with Bullet Button type magazine lock mechanisms which are required by law in some U.S. states (California being among them). This tool is designed to make unlocking and releasing the magazine as simple and easy as possible.Material: Aircraft grade AluminumFinish: RedPrecise CNC MachiningCA CompliantEasy to InstallThe CA Legal Magazine Bullet Button is a product that allows the shooter to drop a magazine with the use of a tool. It prevents finger manipulation of the magazine release, and creates a condition allowable under current individual interpretations of California law. Color may vary slightly from picture posted. ..

$15.95 $4.95

Cerakote Eagle Lite Green | AR-10 .308 Tactical Charging Handle Assembly With Latch Options

Mil-SpecAircraft AluminumCerakote Eagle Lite Green Smoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springFits: .308 RiflesColor may vary slightly from picture posted.LATCH OPTION :LATCH01-BLK-STANDARD CHARGING HANDLE LATCHLATCH07-BLKCNC Machined for precision Color: BLACK0.46 Surface height with 0.70 width Material: Steel for durability Package includes: Spring, Roll Pin and Latch LATCH08-BLKCNC Machined for precision Color: BLACK0.50 Surface height with 0.92 width Material: Steel for durability Package includes: Spring, Roll Pin and Latch LATCH02-AMBIDEXTROUS CNC Machined for precision Color: Black Oxide 2.47 over all length latch Height on one side is 0.64 and on the other is 0.35 to clear some scopesMaterial: Steel for durability ..

$19.99

Cerakote Eagle Lite Green| AR-Pistol Buffer Tube

AR-Pistol Buffer Tube High Quality Aircraft Grade Aluminum CNC Precision Machined Cerakote- Eagle Lite Green Length: 7"Color may vary slightly from picture posted...

$18.99

Cerakote FDE | AR- Pistol Buffer Tube

AR- Pistol Buffer TubeHigh quality aircraft grade aluminum CNC precision machined Has machined pocket for the buffer plunger detent Cerakote- FDE (FLAT DARK EARTH)Length: 7"Color may vary slightly from picture posted. ..

$18.99

Cerakote FDE | AR- Steel Trigger - Made in U.S.A

Machined to precise Mil-Spec dimensionsMaterial: 8620 Alloy SteelFinish: Cerakote FDE (FLAT DARK EARTH)Color may vary slightly from picture posted...

$16.99

Cerakote FDE | AR-10 .308 Ejection port Door Cover Assembly

Ejection Port Cover Door Steel Spring Steel Rod Replaces your missing or damaged ejection port cover on your AR-10 .308 Rifle Cerakote: FDE Color may vary slightly from picture posted ..

$18.99

Cerakote FDE | AR-10 .308 Tactical Charging Handle Assembly With Latch Options

Mil-SpecAircraft AluminumCerakote FDE (FLAT DARK EARTH)Smoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springFits: .308 RiflesColor may vary slightly from picture posted.LATCH OPTION :LATCH07-BLKCNC Machined for precision Color: BLACK0.46 Surface height with 0.70 width Material: Steel for durability Package includes: Spring, Roll Pin and Latch LATCH08-BLKCNC Machined for precision Color: BLACK0.50 Surface height with 0.92 width Material: Steel for durability Package includes: Spring, Roll Pin and Latch LATCH02-AMBIDEXTROUS CNC Machined for precision Color: Black Oxide 2.47 over all length latch Height on one side is 0.64 and on the other is 0.35 to clear some scopesMaterial: Steel for durability Package includes: Spring, Roll pin and Latch LATCH05- OVERSIZED SOLID PATTERN CNC Machined for precision Col..

$19.99