1. Product description:12" X 0.31" Uncut Pica-tinny Blank Rail.2 Specifications:Black anodized aircraft grade aluminumAccepts all standard Weaver / Pica-tinny 1913 accessoriesUncut to enable a custom fitLength: 12 inch ..
7.62x39 Side Mount PlateTHIS PLATE IS REQUIRED IN ORDER TO PROPERLY MOUNT AND FIT A SIDE RAIL QUICK RELEASE MOUNT TO YOUR 7.62 RIFLE OR VARIANT.THIS SIDE MOUNT PLATE NOW COMES WITH ALL NECESSARY HARDWARE TO INSTALL ONTO YOUR RIFLE!Length: 4 inchesWeight: 2.5 ozFits Both Milled and Stamped ReceiversSteelBlack..
Aluminum Harris Bipod Adapter - Style 2Designed to work with any Bipod that mounts onto a standard sling stud - Harris Style, folding, etc.Sling stud is retractable and made of steel.Body Material: High Quality AluminumRail type: Picatinny/WeaverLength: 2"Weight: 2.0 oz..
Constructed by aluminum alloy in andoized matte black finish.Quick release Thumb tightening system,Mounts to a common 20mm rail system.Fits AR series/M series and the other Flat Tops.See Through design allows the users to see the iron sights when mounted.Length:85mm(3.35"),High:31mmWeight: 110gRise: 1"Material: Aluminum alloy..
Made to raise your accessory or optic which can be very helpful when mounting a scope or red dot sight on an AR-15 style rifle...
Shop more Leapers products
This see-through picatinny-style flattop riser is constructed of anodized aluminum.
It is of a tri-rail design that allows for the attachment of accessories.
Riser Height: 1.02"
Fits Picatinny or Weaver rail
Tri-rail for accessory mounting
Material: High Quality Aluminum Rail type: Picatinny/Weaver Bipod Adapter Rotatable sling stud built in is perfect for mounting bipods or attaching to sling swivels. Works great with Harris bipods or any other bipods that mount onto standard sling stud...
Over 6-inch fully Picatinny-compatible top rail with 15 slots; accepts Weaver-style rings and allows use of iron sights.Installs easily, No gunsmithing RequiredMaterial: High Quality AluminumBlack Rubber Rail Guards IncludedRail Type: Picatinny/WeaverDimensions: 6.1"x1.6"x1.8"(L x W x H)Weight: 6.3 oz..
AluminumWeight: 1.8 ozPicatinny/Weaver5 Rails/Slots• Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish• Innovative Shared Rails for Versatile Accessory Placements at 45 and 90 Degree Angles to Allow for Instant Aiming Switch Among Iron Sight, Optical Sight, Laser and/or Flashlight• Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail• Tight Tolerance Control with Anti-rotation Feature to Guarantee Most Positive and Repeatable Zero and Re-zero Capability• Integral Design with Overall Crocodile Profile and Light Weight Machine Cut for Optimal Tactical Applications..
Heavy duty alloy construction
Mount Base: Picatinny/Weaver
Rail Length: 0.65 inch
Total Weight (Base + Swivel): 1.5
Simply push button to detach and attach swivel to the base.
Swivel rotates freely after plugged in.
Allows the Operator to Mount the Swivel Anywhere Along Their Weaver/Picatinny Rail System.
Great for use on Quad Rail forends or other Picatinny accessory rails...
Fits Saiga 12 Ga. and Compatible Variants
Include One 8.75" Top Rail and One 13"Top Rail
Left,Right and Bottom Rail Each with 20 Slots
Material: High Quality Aluminum
Rail Type: Picatinny/Weaver
Weight: 19 oz..
HK / H&K Style Tactical Red Dot / Scope Mount - Claw Mount Rail for GSG-5 , GSG5 Black anodized aircraft grade aluminum Accepts all standard Weaver / 1913 accessories Clamps directly to top of receiver Compatible with most GSG-5 Rifles Rail Length: 5" Weight : 2.4 oz..
This Universal pistol mount will fit any pistol with picatinny/weaver rail under the frame in front of the trigger guard.
Perfect for adding pistol scope or red dot sight on the top rail,
flashlight on the bottom rail under the barrel, and laser sight on the
This mount enable you to still use your iron sights.
You can easily mount most tactical accessories with this mount. All hardware Included!
5.1" long with 10 Weaver/Picatinny Slots on Top, 3 slots on the bottom, and 1 slots on the side.
Material: High Quality Aluminum
Rail Type: Picatinny/Weaver
Finish: Matte black Finish
Weight: 4 oz
Total height: 2.95 inches
Total length: 5.1 inches
Top rail length: 4.13 inches
Top rail width: 7/8 wide
Bottom rail length: 1.38 inches
Bottom rail width: 7/8 wide
Side rail length..
Rail Type: Picatinny
Rail Length: 3.28 inch
Material: T6 Aluminum
Fits: M-1 Carbine
Allows you to add a high-power scope of your choice to your M1 carbine.
Mounts by replacing the rear gun sight...
Mosin Nagant M91/30 Scope with Picatinny Rail - NEW VERSION (EXTENTION LENGHT)
Designed to replace the rear sight base (no need to drill or tap on the
rifle as this mount simply replaces the rear sight base)
The bottom of mount is a tappered 13mm dovetail to perfectly match the tapered dovetail on the barrel of the 91/30 rifle
This scope mount work very well on 91/30, the rail line up correctly with the barrel of rifle
Tight with 4 screws, Very solid and stable mount for your long eye relief scope
Machined from aluminum and has a matte black finish
THIS IS EXTENTION LONG NEW VERSION, AS YOU CAN SEE IN THE PHOTOS...
This 12GA 1" Shotgun Magazine Tube Rail Mount is design to fit onto most 1” diameter Extended Shotgun Mag tubes.
When mounted onto you Shotgun Extended Magazine tube, this will allow
you to attach multiple weaver & Picatinny style accessories to your
The rails are designed so that you can attach your accessories like
Lasers and Flashlight at any of the 5 angles that the rails provide.
You can either mount your accessories at the typical 3, 6, and 9
O’clock positions; or mount the accessories in the 4/5 and 7/8 O’clock
This can also be used on any 1” diameter accessories like 1” scope tube bodies, flashlights, and lasers.
Mounts onto most 12 gauge shotgun mag tubes with the two provided Allen head bolts.
Installation may require user to disassemble shotgun barrel, magazine tube/end cap/ clamp.
Fits 1” Diameter tubes
Overall Height: 1.5”
Overall Length: 1.4”