-
Your shopping cart is empty!
Your shopping cart is empty!
AR-15 10" Ultra Slim Keymod Handguard Constructed of 6061 AluminumPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"Front and Rear Sight Combo SetFeatures Impact resistant polymer construction Spring-loaded flip up sight easily activated from either side or by pressing the top Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc. Protective wings shield the spring-locking A2 front sight postSpecifications Weight, w/ hardware: 1.2 oz. Height above rail, stowed: ~0.51 in. Length, stowed: 2.6 in. Length, deployed: 1.5..
$49.99 $29.99
Includes: Pistol Buffer Tube Buffer Tube Foam Pad Buffer Buffer Spring Steel End Plate Steel Castle Nut Detail: CNC machined aluminum buffer tube to fit carbine buffer and spring. Hard anodized type III black finish. Machined lower slot to accept all end plates and sling mounting accessories. Superior Quality Carbine Buffer Spring Standard 3 oz buffer Quality Polyurethane Bumper for longer life Steel Ambidextrous End plate and Castle nut. &..
$23.99
Side Charging Handle (Bolts on Directly to Bolt Carrier) IncludedBolt Carrier Group Included Perfect for Rear Scope Clearance Upper Receiver Type: Flat Top Compatible with: AR-15/M16Material: Forged 7075 Aluminum Finish: Black- Type III, Hard Anodizing M4 Feed Ramps: Yes Bolt Carrier Specification Slab Side Nitride Bolt Carrier with Properly Staked Gas key Bolt is MPI tested with a Phosphate FinishSide Charging Handle is Steel with Knurling for more purchase.MADE IN U.S.A ..
$229.99 $169.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER ,BCG AND MAGAZINE**** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 MAGPUL M-LOK HAND GUARD CARBINE | USA MADEMOE M-LOK Hand Guard, Carbine-LengthWeight: 6.8 oz.Length, overall: 7.1 in.Length, mounting: 6.6 in.Height, excluding lip: 2.5 in.Width, max: 2.2 in.USA MADEAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 DELTA RING ASSEMBLYAluminum Delta ring with Black Anodi..
$399.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 MIL-SPEC UPPER RECEIVER -DRY FILM LUBE -MADE IN U.S.A.Black Anodiz..
$399.99 $279.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguard-7''6061 AluminumKEYMOD HANDGUARDLength: 7"Includes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Mad..
$459.99 $299.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppresso..
$349.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Carbine Length 7"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:7"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 .223 5.56 Nato Steel Shark Muzzle Brake|American Flag LazerCNC Machined High Quality SteelHeat Treated.223 / 5.56 Nato Shark Muzzle BrakeSide Ported And Ported On TopSolid Machined ConstructionBlack Oxide FinishReduced Back Pressure1/2"x28 Pitch Washer I..
$389.99 $299.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumIncludes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiver7075 T6 Aluminum2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Length: 10"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"Barrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:7 Twist Parkerized FinishMaterial: ..
$399.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Tactical T-Series Free Floating 7 inch Carbine Handguard Quad Picatinny Rail Mount System fit .223 5.56 Rifle GunsFour military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: 180mm (7.0 inch)Weight (net): 340g (12.0 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex key and gift boxFit most model 4Shock proof can be used on real fire caliber AR-15 ..
$399.99 $289.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 15Inch Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 16" Rifle Barrel 7.62x39 1:10 Twist Finish: ParkerizedTwist: 1/10Gas Block Diameter: .750"Carbine Length with a g..
$379.99 $359.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER AND MAGAZINE**** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Light Frame Rail System | CERAKOTE Burnt BronzeMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 12" Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock locationTop rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Sniper Gray Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyA..
$489.99 $389.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 15Inch Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutDetails:Fits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"AR-15 16" Rifle Barrel 7.62x39 1:10 TwistFinish: ParkerizedTwist: 1/10Gas Block Diameter: .750"Carbine Length with a gas hole ..
$489.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Light Weight Keymod Hand GuardLength: 7''6061 Aluminum Super Slim Design Black Anodized Keymod Steel Barrel Nut Included Lightweight (9.6-10.7 OZ) Free Float Includes Accessory rails Birdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lightweight Upper ReceiverMaterial: Aircraft grade AluminumFinish: Black..
$349.99 $249.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguard-7''6061 AluminumKEYMOD HANDGUARDLength: 7"Includes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Mad..
$489.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 7",10",12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- S..
$459.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Super Slim Free Float Handguard with Accessory Rails and Steel Barrel NutM-LOK Slots Matte Black Finish Inside Diameter Total Weight: 7" - 8.9 OZ Anti Rotation TabsAircraft- Grade AluminumOne Piece Free Float Design Full Length Picatinny Top Rail Super Slim Light Weight Design AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USABirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Ma..
$359.99 $319.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC Machined High Quality SteelHeat TreatedMulti Ported DesignSolid Machined ConstructionBlack Oxide FinishTuned ported on top to Reduce muzzle riseSolid bottom controls dust printing1/2"x28 Thread PitchWeight: 2.2 oz.Lenghth: 2" Approx.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rat..
$459.99 $359.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER ,BCG AND MAGAZINE**** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 M-LOK New Design Rail SystemMaterial: Aircraft grade 6061 aluminum Available Length: 10'',12'',15"Internal diameter: 1.33 Wide, 1.65 High Finish: Black hard coat type 3 anodizedSteel barrel nut included 6 screw fasteners design with proprietary screw for easy installation Flush fit onto receiver Spanner wrench needed to torque barrel nut to spec (not included) hex wrench All rail sizes do come with two 3 slot M-LOK or (1.58") AR-15 5.56 NATO Match Grade 1:8 Twist Rifle Barrel- 16"CNC Precision Machined 4150 Heat Treated SteelDurable Black Nitride FinishGas Block System: 0.750M4 Contour 1:8 Twist ..
$309.99 $279.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER ,BCG AND MAGAZINE**** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Super Slim Free Float Handguard with Accessory Rails and Steel Barrel NutM-LOK Slots Matte Black Finish Inside Diameter Total Weight: 7" - 8.9 OZ Anti Rotation TabsAircraft- Grade AluminumOne Piece Free Float Design Full Length Picatinny Top Rail Super Slim Light Weight Design AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 .223 5.56 Nato STEEL Shark Muzzle Brake 1/2x28 Pitch ThreadCNC Machined High Quality SteelHeat Treated.223 / 5.56 Nato Shark Muzzle Br..
$289.99 $249.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Super Slim Ultra Light Free Float 7" Inch Carbine Length HandguardMaterial: Aircraft Grade AluminumRail Type: Picatinny/WeaverDual Rail Type: Top/BottomSuper Slim Design 1.35" Inner DiameterLength: 7" inchHeight: 2.27" inchWidth: 1.65" inchWeight: 7.4 Oz.Flat Dark Earth CerakoteIncluded a Solid Steel barrel nut for easy installationColor may vary slightly from picture posted.AR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppressor Muzzle BrakeCNC Machined High Quality SteelHeat TreatedMulti..
$399.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength options: 7",10",12",15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.Includes crush washerAR-15 Mil-Spec Upper Receiver- Made in U.S.A.High quality and lig..
$359.99 $269.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 10" Ultra Slim Keymod Handguard [CERAKOTE] | SNIPER GRAYConstructed of 6061 AluminumIncludes 2 Black Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98" Color may vary slightly from picture posted BCA 10.5'' 5.56 Nato Barrel | Made in U.S.AManufacture: Bear Creek Arsenal Chamber: 5.56 NATO&n..
$489.99 $389.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER, OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Magpul M-LOK Hand Guard | Made in U.S.AMOE M-LOK Hand Guard, Carbine-LengthWeight: 6.8 oz.Length, overall: 7.1 in.Length, mounting: 6.6 in.Height, excluding lip: 2.5 in.Width, max: 2.2 in.USA MADEBCA 16" 5.56 Nato Match Grade 1:8 Twist Rifle Barrel | Made in U.S.A Manufacture: Bear Creek ArsenalCNC Precision Machined 4150 Heat Treated SteelDurable Black Nitride FinishGas Block System: 0.750M4 Contour 1:8 Twist rate1/2x28 ThreadedMade in USAAR-15 Phantom Muzzle Brake CNC Machined High Quality 4140 Steel Finish: Black Phosphate &..
$459.99 $429.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBarrel: AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized FinishMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mock Muzzle Brake Flush Mount Shroud 1/2x28 Thread"Over Barrel Flush Mount Design"CNC Precision Machined ConstructionHigh Strength Billet AluminumHeat Treated1/2x28 Reverse Th..
$309.99 $269.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 12”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyAR-15 STAIN..
$409.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 .223 A2 STAINLESS STEEL BIRDCAGE MUZZLE BRAKEStandard GI styleCNC machined from solid 303 stainless steel bar stockThread pitch 1/2x28 For AR15Rust and corrosion resistant Stainless steel AlloyOverall length1¼Helps..
$369.99 $339.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight ..
$339.99 $299.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 M-LOK New Design Rail SystemMaterial: Aircraft grade 6061 aluminum Length: 10"Internal diameter: 1.33 Wide, 1.65 High Finish: Black hard coat type 3 anodizedSteel barrel nut included 6 screw fasteners design with proprietary screw for easy installation Flush fit onto receiver Spanner wrench needed to torque barrel nut to spec (not included) hex wrench All rail sizes do come with two 3 slot M-LOK or (1.58") AR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerize..
$379.99 $349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10'' 12'' 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come wi..
$379.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 10" Free Float Keymod Handguard Rail SystemLightweight handguard with 7 angled surfaces for attaching keymod rail sections, each with 12 holes. The top Picatinny/Weaver rail has 27 slots. Includes Barrel Nut, setscrew nut and Allen wrench.Material: CNC Precision Machined 6061 AluminumFinish: Hard Black AnodizedLength: 12"Rhino R-23 Tactical Magwell Grip and FunnelThe Rhino R-23™ tactical magwell grip and funnel is designed to significantly improve magazine reload speed and firearm handling. The Rhino™ reduces magazines change times on average by 48% and without ever having to take your eyes off your target. The magazine well grip gives y..
$349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod ..
$399.99 $359.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguard-7''6061 AluminumKEYMOD HANDGUARDLength: 7"Includes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 .223 A2 STAINLESS STEEL BIRDCAGE MUZZLE BRAKEStandard GI styleCNC machined from solid 303 stainless steel bar stockThread pitch 1/2x28 For AR15Rust and corrosion resistant ..
$369.99 $329.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight ..
$349.99 $319.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Cerakote FDE -Ultra Light Frame Rail System 12"[CERAKOTE] | Robins Egg | Sniper Gray | Red | Sig Pink | FDE |aterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torqu..
$399.99 $369.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod ..
$429.99 $379.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum.Length: 15”Internal diameter: 1.39” width 1.67 height.Finish: Black Hard-coat type III Anodized. Barrel nut material: Steel.6 screw fasteners design with proprietary screw for easy installation.Flush fitment on receiver.Inside Diameter: 1.39".Spanner wrench needed to torque barrel nut to spec (not included) and hex wrench.Rail comes with two 3 slots M-LOK or (1.58”).15” M-LOK location: 8 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 5 M-LOK sections/ Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the..
$369.99 $349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 / M4 Quad Rail Hand Guard Oval Ports 6.5" T6 6061 Aircraft Aluminum Bead Blast with Type III Anodizing Precise CNC machining Mil Spec 1913 Picatinny 2 Piece Drop In Rail System OVAL PortsDrop-in Rail Systems guarantee precise fitment with your Mil Spec Standard AR M4 upper receiverAR-15 Delta Ring Assembly w/ Steel Barrel NutAluminum Delta ring with Black Anodized finish.Weld spring with Phosphate finishSnap RingHeat Treated Steel Barrel nutComes Fully AssembledUsed for installing barrel to upper receiver and retaining drop in style hand guard.Birdcage Muzzle BrakeSPECS: Machine..
$359.99 $309.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**NEW AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 5.56 NATO 1:7 Twist 10.5 Inch 5.56Chamber: 5.56 NATO (will shoot .223)Length: 10.5”Twist Rate: 1:7Gas Port: 0.750"Gas System: Pistol Thread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedPlease refer to your local state laws before purchasingAR-15 KRINKOV MUZZLE FLASH CAN BRAKEInner cone recycles gas pressure into action for efficient cycling in SBR’s and reduce muzzle flash. Diameter: 1 1/2Thread pitch: 1/2x28We..
$379.99 $349.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15/47/9/300AAC Clamp On Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 7''Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black annodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Flush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchAR-15 7.5" Barrel .223 Wylde 1:7 TwistChamber: 5.56/.223Length: 7.5"Twist Rate: 1:7Gas Port: 0.750"Gas System: PistolThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized Made In USAAR-15 Multi Ported Flash Suppresso..
$339.99 $319.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Free Float Quad Rail Handguard Extended Length 16"Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationLength:16"AR-15 16" BARREL 300 AAC BLACKOUT 1:7 TWISTLength: 16”Chambered: .300 BLK (AAC Blackout)1:7 Twist.750” gas block diameterCarbine length with enhanced gas port hole diameter.5/8”X24 Tread Pitch4140 gun quality steel, heat treaded to RC 28-32 hardness, stress relievedParkerized finishEach barrel is made to precise specifications and designed to hold a 1.000” MOA at 100 yards with appropriate ammo and shooting techniques. This barrel car..
$489.99 $429.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod ..
$429.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR 15 KEYMOD FREE FLOAT CLAMP-ON STYLE HAND GUARD W/DETACHABLE RAILS/12"Free Float, Tactical T-Series, One Piece Carbine Style, Full Metal for Real Fire Caliber, 7 Inch, Easy & Quick InstallationT style: the upper rail is extended over the barrel nut for a 'no-gap' monolithic lookModel: KFC12Four military picatinny rails for the installation of flashlight, laser, grip, bipod and red dot scope etcLength: (12.0 inch)Weight (net):(16 ounce)Inside Dia 46mm (1.8 inch)Lower rail style with CNC procedureOne piece style more accurateLight weight in precisionEasy and quick installationHigh quality aluminum alloy in durable black matte finishWith hex ke..
$379.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR15 15" Ultra Slim Keymod Handguard W/ Steel Barrel NutConstructed of 7075 T6 AluminumPre-Drilled Steel Barrel NutFits any AR-15 upper receiver7075 T6 AluminumComes with Steel Barrel NutLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.15" long Rifle LengthRemovable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.36" (without Rail)Height : 1.98"6" Slotted AR-15 Muzzle Brake Compensator - BlackRecoil Compensator w/ Sleek Custom DesignTwelve 45 Degree Ports (6 each side)1/2..
$459.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 15"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsAR-15 Custom Steel "Zombie Slayer" Muzzle Brake 4"InchCNC Precision Machined Superior SteelSide Ported And Ported On Top1/2X28 PitchBlack Parkerized FinishHeat TreatedWraps around your threaded barrel and threads onto 1/2x28 thread pitch.Custom Design With Extra Long Razor Sharp Steel ProngsAR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Tw..
$489.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 Ultra Slim Keymod Handguards W/ Steel Barrel NutConstructed of 6061 AluminumIncludes 2 Detachable Accessory RailsPre-Drilled Steel Barrel NutFits any AR-15 upper receiver2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.length: 15"Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"AR-15 .223 5.56 Nato STEEL Shark Muzzle Brake 1/2x28 Pitch Thread + Free Crush Washer CN..
$389.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER, BCG OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**Cerakote ODG | AR-15 Ultra Light Frame Rail SystemMaterial: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote ODGBarrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationFlush fitment on receiver no gapSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymo..
$369.99
** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **** ASSEMBLED UPPER & TEST FIRE MAY TAKE UP TO 7-10 BUSINESS DAYS TO PROCESS ** ** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED ***UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**AR-15 M-LOK Design Rail System-V2Material: Aircraft grade 6061 aluminumLength: 12"Finish: Black hard coat type 3 anodizedSteel barrel nut includedFlush fit onto receiverAll rail sizes do come with two M-LOK railsBirdcage Muzzle BrakeSPECS: Machined steel 1.75" (4.4cm) long, 7/8" (2.2cm) O.D. ½”-28 tpi.AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish BarrelMateriall: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USAAR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.High quality and lightweight..
$329.99
-50x50.jpg "AR-15 10\" Ultra Slim Keymod Handguard w/ FREE Flip Up Sights")
-50x50.jpg "AR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- Side Charging Handle")
-50x50.jpg "AR-15 ''CREED'' Carbine Kit")
-50x50.jpg "AR-15 ''HORUS'' Carbine Kit")
-50x50.jpg "AR-15 ''RIGHTEOUS'' Pistol Kit")
-50x50.jpg "AR-15 ''MALICE'' Pistol Kit")
-50x50.jpg "AR-15 ''STANDARD'' Pistol Kit")
-250x250.jpg "AR-15 10\" Ultra Slim Keymod Handguard w/ FREE Flip Up Sights")
-250x250.jpg "AR-15 .223/5.56 Complete Pistol Buffer Tube Kit")
-250x250.jpg "AR-15 Side Charging Upper Receiver Assembly-Bolt Carrier Group- Side Charging Handle")
-250x250.jpg "AR-15 ''CREED'' Carbine Kit")
-250x250.jpg "AR-15 ''HORUS'' Carbine Kit")
-250x250.jpg "AR-15 ''RIGHTEOUS'' Pistol Kit")
-1-250x250.jpg "AR-15 ''TRIDENT'' Pistol Kit")
-250x250.jpg "AR-15 ''STARS AND STRIPES'' Pistol Kit")
-250x250.jpg "AR-15 ''OLD GLORY'' Carbine Kit")
-250x250.jpg "AR-15 ''MALICE'' Pistol Kit")
-250x250.jpg "AR-47 ''LaMOE'' Carbine Kit")
-250x250.jpg "AR-47 ''SUNDOWN'' Pistol Kit")
-250x250.jpg "AR-15 ''STANDARD'' Pistol Kit")
-250x250.jpg "►►AR-15 ''RIGHTEOUS SIDE CHARGING EDITION'' Pistol Kit")
-250x250.jpg "►►AR-15 ''HORUS SIDE CHARGING EDITION'' Carbine Kit")
-250x250.jpg "AR-15 ''REBEL'' Pistol Kit")
-250x250.jpg "AR-15 ''UNITY'' Carbine Kit")
-250x250.jpg "AR-15 ''VULTURE'' Carbine Kit")
-250x250.jpg "AR-15 ''HAWK'' Pistol Kit")
-250x250.jpg "AR-15 ''TRIDENT MARK II'' Pistol Kit")
-250x250.jpg "AR-15 ''STANDARD'' Carbine Kit")
-250x250.jpg "AR-15 ''WIDOW'' Carbine Kit")
-250x250.jpg "AR-15 ''SENTINEL'' Carbine Kit")
-250x250.jpg "AR-15 ''LIBERTY'' Carbine Kit")
--250x250.jpg "AR-15 ''VALOR'' Pistol Kit")
-250x250.jpg "AR-15 ''VIPER'' Carbine Kit")
-250x250.jpg "New AR-15 ''SALVO'' Pistol Kit")
-250x250.jpg "AR-15 ''VALIANT'' Carbine Kit")
-250x250.jpg "AR-15 ''ARBITER'' Carbine Kit")
-250x250.jpg "AR-15 ''PATRIOT'' Carbine Kit")
-250x250.jpg "AR-15 \"THE BLACK PEARL\" Pistol Kit")
-250x250.jpg "AR-15 ''AEQUITAS'' Carbine Kit")
-250x250.jpg "AR-15 ''PRISM CERAKOTE'' Carbine Kit")
-250x250.jpg "AR-15 ''INFILTRATOR'' Pistol Kit")
-250x250.jpg "AR-15 ''STRYKER'' Carbine Kit")
-250x250.jpg "AR-15 ''SHEEPDOG'' Carbine Kit")
-250x250.jpg "AR-15 ''MARAUDER'' Pistol Kit")
-250x250.jpg "AR-15 ''NEMESIS'' Pistol Kit")
-250x250.jpg "AR-15- 300 BLK Out ''FURY'' Carbine Kit")
-250x250.jpg "AR-15 \"451\" Carbine Kit")
-250x250.jpg "AR-15 ''ENFORCER'' Carbine Kit")
-250x250.jpg "AR-15 ''INFINITY'' Carbine Kit")
-250x250.jpg "AR-15 ''SLAYER'' Carbine Kit")
-250x250.jpg "AR-15 ''BLACK'' Carbine Kit")
-250x250.jpg "AR-15 ''ENVY'' Carbine Kit")
-250x250.jpg "AR-15 ''VERITAS'' Carbine Kit")