MANUFACTURED TO FIT THE MIL SPEC STANDARD LOWER PARTS
KITRamped carrier group uses standard mil-spec
hammer Spring loaded enhanced firing pin Machined from 8620 tool steel Finish: PhosphateWeight: 14.7 ozCompatible with both GLOCK and COLT 9mm AR-9
in ready Properly staked keyRemovable ramped counter weight to use with
fold-able stocks ..
Made to withstand heavy recoil Aluminum Body / Matt Black Finish Ring mount attaches to weaver/picatinny mounts/rail systems / For any 20mm Wide rails 150 Lumens Cree LEDs give you 50x longer life span than standard flashlight bulbs and 10x more battery life On/Off activation either via switch on end cap or with remote curly cord activation switch Length: 3.62 " Weight: 3.5 Oz Includes: Batteries ( CR123A x 1 ) Included Weaver / Picatinny Ring mount Curly cord switch , regular cap switch and flashlight allen Wrench..
TORKMAG 9mm Glock magazine Conversion KitCompatible with all Mil Spec AR-15 LowersNo Modification to the lower necessary Duel Block System is held firmly in place with set screws (Included) Use with factory Glock Mags, Torkmag 9mm Magazine and .40 S&W Cal Glock Magazines Also Allows this kit to be used with Factory Mags with a few adjustments: Visit: WWW.TORKMAG.COM/MANUALS.HTML1 Year Manufacturer Warranty through TORKMAG Company..
3-Stage height adjustment: each stage level is 1/2" apart for precise elevationQuickly change is stage adjustment by push button, locks safely and effective.Overall length not extended as fore grip is 6 1/2"Overall length is extended with bipod 9 1/4"Each bipod leg has hard plastic endcaps to provide more ground purchase Dimension: 6.50inx2.87inx1.77inchTo move the fore grip it has a built in push button for picatinny and lock bolt and nut toprovide a sturdy bipod.Features a removable pressure pad section for pressure pad accessories. For placement you need a 2 3/4 minimum rail section to fasten correctly...
16"9mm Heavy BarrelMelonite Finish Chambered: 9x19 Luger 1:10 Twist All NFA rules apply4150 carbon steel heat treated Muzzle Threads: ½-36Fits mil-spec receiversCan be used on Colt and Glock platforms AR-9 Made in the U.S.A..
Chambered: 9x19 Luger
All NFA rules apply
4150 carbon steel heat treated
Muzzle Threads: ½-36
Fits mil-spec receivers
Can be used on Colt and Glock platforms AR-9
Using the dependable blowback design (not
drilled gas port for barrel)
Made in the U.S.A..
Length: 4.5"9 x 19 Parabellum1:10 Twist4150 Heat treated and stress relieved Chrome Moly Vanadium quality steel.Finish: Black NitrideMade in the U.S.AFits: AR-15MUZZLE BRAKE TREAD PITCH IS THE SAME AS AR-15 1/2X36..
MANUFACTURED TO FIT THE MIL SPEC STANDARD LOWER PARTS KITRamped carrier group uses standard mil-spec hammerSpring loaded enhanced firing pinMachined from 8620 tool steelFinish: nitirde Weight: 14.7 ozCompatible with both GLOCK and COLT 9mm AR-9 magazinesDrop in readyProperly staked key..
AR-9 Birdcage Muzzle BrakePhosphate finish1/2x36 thread pitchCaliber: 9x19 length: 1 3/4"Weight: 2.3 ozHelps control muzzle rise, flash and recoilFinished with a black phosphate with 5 down force ventsIncludes crush washer..
Constructed on CNC machine out of a block of steel
with a black oxide battle finish. 9 port design to provide comfort with a
minimal pressure blast Features:Black oxide
finish Heat treated (to
harden the metal)TPI competition
design with 9 portsLength: 2.3125”½”x36 thread
pitch Manufactured to
This muzzle brake has 6 slots to disperse the gasses. The muzzle brake is chambered for the 9mm platform and CNC machined out of solid 4150 Steel with a high quality Black Phosphate finish.The serrations are intrusive and can be used to break glass, doors, and other non-lethal methods. All ports are vertical to disperse the pressure gasses and provide minimal pressure blast to the operatorItem detail:CNC machined from solid 4150 steel constructionPhosphate finishSerrated design with 6 slots1/2x36 thread pitchCaliber: 9x19 LuggerFinish: phosphateWeight: 2.0 oz.Length:1.075" This muzzle brake does not include the washer..
9MM thread protector will protect your threads if you plan on going without a muzzle brake/device on your rifle.Description:Heat TreatedSolid Machined ConstructionBlack w/ Nerling pattern1/2"x36 Pitch..
9MM thread protector will protect your threads if you plan on going without a muzzle brake/device on your rifle.Description:Heat TreatedSolid Machined ConstructionSTAINLESS STEEL w/ Nerling pattern1/2"x36 Pitch..
AR-9MM Multi Ported Muzzle BreakCNC Machined High Quality heat Treated Steel10 linear ports over the top to reduce muzzle rise 5 large ports on either side to dissipate gasFinish: Black Oxide Caliber: 9x19Thread Pitch: 1/2x 36Length: 2.3"Weight: 2.8oz..
Custom AR-9MM Tactical Design Muzzle BreakCNC Machined High Quality Heat Treated Steel3 ports over the top to reduce muzzle rise 1 large port on either side to dissipate gas quickly Finish: Black Oxide Caliber: 9x19mmThread Pitch: 1/2x 36Length: 1.7"Weight: 5.8ozJam nut included ..