✈✈ Free shipping on all orders ✈✈

AR-15 ''REACTION'' Carbine Kit

-23% AR-15 ''REACTION'' Carbine Kit

** THIS KIT DOES NOT INCLUDE LOWER RECEIVER OR MAGAZINE **

** KITS CANNOT BE CHANGED, NO MODIFICATIONS WILL BE ACCEPTED *

**UNDER CALIFORNIA STATE LAW AB 857: 80% LOWER RECEIVERS WILL NOT BE SHIPPED TO CA RESIDENTS (separate or in kits)**


AR15 10" Super Slim Keymod handguard w/STEEL Barrel Nut

Constructed of 7075 T6 Aluminum

Pre-Drilled Steel Barrel Nut

Details:

  • Fits any AR-15 upper receiver
  • 7075 T6 Aluminum
  • Comes with Steel Barrel Nut
  • Lightweight
  • Monolithic top rail is continuous with flat top receiver
  • 1913 Picatinny rail top
  • The Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.
  • 10" long Rifle Length
  • Removable rail System
  • Sectional Rails Can Be Moved To Different Positions
  • outside Diameter: 1.536" (without Rail)
  • inside Diameter: 1.36" (without Rail)
  • Height : 1.98"

  • AR-15 Competition Muzzle Brake (TPI) 

    • Black oxide finish
    • Heat treated (to harden the metal)
    • TPI competition design with 9 ports
    • Length: 2.3"
    • Weight: 3.4 oz
    • 1/2"x28 Pitch


    AR-15 5.56 NATO 16" Inch Rifle Barrel 1:8 Twist Parkerized Finish Barrel

    • Materiall: 4150 Heat Treated Steel

    • Chamber: 5.56/.223
    • Length: 16"
    • Twist Rate: 1:8
    • Gas Port: 0.750"
    • Gas System: Carbine
    • Thread Pitch: 1/2x28
    • Feed Ramps: M4
    • Finish: Parkerized
    • MADE IN USA


    AR-15 Mil-Spec Upper Receiver (Stripped) - Made in U.S.A.

    • High quality and lightweight stripped Upper Receiver

    • Material: Aircraft grade Aluminum

    • Finish: Black Anodized


    AR-15 .223/5.56 Bolt Carrier Group- Black Nitride

    PROUDLY MADE IN THE USA!

    Carrier

    • Machined from 8620 tool steel

    • Heat treated to military specifications

    Bolt

    • Machined from 9310 tool steel

    • Heat treated to military specifications

    • Shot Peened

    • Ground to meet military required tolerances

    • MPI (Mag Particle Inspected)

    Gas Key

    • Machined from 4140

    • Heat treated to military specifications

    Extractor

    • Machined from 4140

    • Heat treated to military specifications

    • Shot peened

    Firing Pin

    • Machined from 8640 tool steel

    • Heat treated to military specifications

    • Ground to meet military required tolerances

    • Coated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2

    Cam Pin

    • Machined from 4340

    • Quench and temper heat treat

    • Ground to meet military required tolerances

    Charging Handle

    • Body is 6061 T6 Billet Aluminum
    • Latch is 7075 T6 
    • Black Type III Hardcoat Anodizing

    Dust Cover

    • Dust Cover, Spring, and Rod are constructed from 4150 Steel

    • Black Type III Hardcoat Anodizing

    Write a review

    Note: HTML is not translated!
        Bad           Good

    FREE

    shipping on all orders! All orders ship out within 48 hours during weekday. (excluding items that need to be test-fired)

     

    Disclaimer

    KIT SHOWN ASSEMBLED TO DISPLAY FINISHED PRODUCT

    Restriction

    This product cannot be shipped out of the U.S.A

    • Views: 57031
    • Product Code: AR-15 ''REACTION'' Carbine Kit
    • Availability: In Stock
    • $517.49
    • $399.99

    Available Options

    Tags: OUTDOORSPORTSUSA, AR-15, .223, 5.56, 10 INCH HANDGUARD, KEYMOD, STEEL BARREL NUT, COMPETITION MUZZLE BRAKE, 12X28, NATO, 16 INCH RIFLE, 1:8 TWIST, PARKERIZED, CARBINE GAS SYSTEM, MADE IN U.S.A, BCG, BLACK NITRIDE, AMBIDEXTROUS, SKELETON, 9 INCH BUFFER TUBE