-
Your shopping cart is empty!
Your shopping cart is empty!
Each of our Mil-Spec Bolt Carrier Group Assemblies is made in the U.S.A. and feature full-auto capability, a shot peened MPI Bolt, 8620 Gas Carrier and Gas Key fastened with hardened Grade 8 fasteners. The ultra-hard and corrosion-resistant Black Nitride ensures this BCG's continued reliability and precision.Features:M16 Style (Full Auto).223/5.56 CaliberLIGHTWEIGHTMil-SpecPrecision MachinedHeat Treated SteelShot Peened MPI Bolt - Carpenter 158 Material8620 Gas CarrierMade in USAUltra Hard Black Nitride FinishFits: AR-15 / M16..
$229.99 $189.99
AR-15 .223/5.56 Bolt Carrier Group- Black NitridePROUDLY MADE IN THE USA!CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedGround to meet military required tolerancesMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treatedGround to meet military required tolerances..
$139.99
MADE IN THE U.S.A Heat treated, shot peened, relief cut, and machined to exact mil spec dimensions.Nickel boron coated to provide increased lubricity and much greater wear resistance than other finishes. The coating makes easier cleaning Bolt Features Carpenter 158 Steel Heat treated Shot Peened MPI Tested MaterialNickel Boron CoatedBolt Carrier Features 8620 SteelNickel Boron CoatedNickel Boron Coated BoreFull Auto M-16 Style with more mass for mass ..
$159.99
AR-15 .223/5.56 Bolt Carrier Group- DIAMOND (DLC) (Made in USA)CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treat..
$189.99 $169.99
DUAL AMBIDEXTROUS W/STEEL LATCH CHARGING HANDLEAMBIDEXTROUS CHARGING HANDLEMaterial: 6061 T6 aluminumLatches are steelFinish: Type III hard-coat anodizedPerfect replacement for any factory charging handleOversize release levers on both sidesNo gun smith requiredCan be charged in any desired motionAR-15 .223/5.56 Bolt Carrier Group- Black NitridePROUDLY MADE IN THE USA!CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedGround to meet military required tolerancesMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treat..
$149.99
DUAL AMBIDEXTROUS W/STEEL LATCH CHARGING HANDLEAMBIDEXTROUS CHARGING HANDLEMaterial: 6061 T6 aluminumLatches are steelFinish: Type III hard-coat anodizedPerfect replacement for any factory charging handleOversize release levers on both sidesNo gun smith requiredCan be charged in any desired motionNICKEL BORON Bolt Carrier GroupMADE IN THE U.S.A Heat treated, shot peened, relief cut, and machined to exact mil spec dimensions.Nickel boron coated to provide increased lubricity and much greater wear resistance than other finishes. The coating makes easier cleaning Bolt Features Carpenter 158 Steel Heat treated Shot Peened MPI Tested MaterialNickel Boron CoatedBolt Carrier Features8620 SteelNickel Boron CoatedNickel Boron Coated BoreFull Auto M-16 Style with more mass for mass..
$169.99
DUAL AMBIDEXTROUS STEEL LATCH CHARGING HANDLEMaterial: 6061 T6 aluminumWith Steel LatchFinish: Type III hard-coat anodizedPerfect replacement for any factory charging handleLatches are 6061 T6 aluminum CNC machineOversize release levers on both sidesNo gun smith requiredCan be charged in any desired motionAR-15 .223/5.56 Bolt Carrier Group- DIAMOND (DLC) (Made in USA)CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treat..
$199.99 $179.99
AR-15 TALON TACTICAL CHARGING HANDLE ASSEMBLYMil-Spec6061-T6 Aircraft Aluminum Body Steel Latch for durabilityBlack Anodize FinishSmoothest Operation under Extreme ConditionsIncludes: Handle, latch, pin and springFits: AR-15 Rifles AR-15 .223/5.56 Bolt Carrier Group- DIAMOND (DLC) (Made in USA)CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treat..
$199.99 $179.99
AR-15 .223/5.56 Bolt Carrier Group- Black NitridePROUDLY MADE IN THE USA!CarrierM16 style (Auto)Machined from 8620 tool steelHeat treated to military specificationsBoltMachined from 9310 tool steelHeat treated to military specificationsShot PeenedGround to meet military required tolerancesMPI (Mag Particle Inspected)Gas KeyMachined from 4140Heat treated to military specificationsExtractorMachined from 4140Heat treated to military specificationsShot peenedFiring PinMachined from 8640 tool steelHeat treated to military specificationsGround to meet military required tolerancesCoated with .0002”-.0003” of hard chrome per MIL-STD-171 1.2.2.2Cam PinMachined from 4340Quench and temper heat treatedGround to meet military required tolerancesCHARGING HANDLE: CH223Mil-Spec6061-T6 Aircraft Aluminum Body with 7075 Latch Black Anodize FinishSmoothest Operation under Extreme ConditionsIncludes: Handle,latch,pin and springFits: AR-15 RiflesCHARGING HANDLE: CHLATCHMil-SpecCharging Handle Body is 6..
$144.99
The cam pin is made to mil-spec standards for use with AR-15 & M16 bolts and bolt carriers..
$9.99
High quality and lightweight stripped Upper Receiver (does not include upper parts).Material: Aircraft grade AluminumFinish: Black AnodizedAMERICAN MADE..
$69.99
Manufacturer: Anderson Manufacturing AR-15 Stripped Upper Receiver Accepts Standard Foward Assist and Dust CoverUnmarked T-marksFeed Ramps: M4Finish: Hardcoat AnodizedMaterial: 7075-T6 Aluminum Upper Weight: 6.9 oz | Package Weight: 8.5 oz Made in U.S.A..
$79.99
AR-15 Black Anodized Billet Upper Receiver | Made in U.S.A CNC machined from 7075-T6 Billet aircraft grade aluminum 1913 picatiny rail Slick side upper with no forward assist or shell deflectorEjection port is beveled and enclosedBillet uppers are much stronger than a conventional forged upper with extra strength and high stress points reinforced designed to withstand even the most punishing abuse.Along with extensive testing that was done past the point of failure of a conventional forged upper where this billet upper withstood the failure point and surpassed it by 12x the hea..
$139.99
AR-15 Raw Billet Upper Receiver | Made in U.S.A CNC machined from 7075-T6 Billet aircraft grade aluminum 1913 picatiny rail Slick side upper with no forward assist or shell deflectorEjection port is beveled and enclosedBillet uppers are much stronger than a conventional forged upper with extra strength and high stress points reinforced designed to withstand even the most punishing abuse.Along with extensive testing that was done past the point of failure of a conventional forged upper where this billet upper withstood the failure point and surpassed it by 12x the heat and&..
$119.99
High quality and lightweight stripped Upper Receiver (does not include upper parts)Material: Aircraft grade AluminumFinish: Black AnodizedLaser engraved LOGO ..
$119.99
High quality and lightweight stripped Upper Receiver (does not include upper parts).Material: Aircraft grade AluminumFinish: Cerakote BlackForged 7075 T6 Mil-spec Flat Top Upper..
$69.99
SAA Stripped Forged Upper Receiver for the AR-15Flat top A3 upper receiver with white T-marks, accepts standard AR15/M16 components. Precision machined to M16/M4 specs Forged, Mil-spec A3 Flat Top Upper Forged from 7075 T6 aluminum Matte black hard coat anodized mil 8625 type 3 class 2Laser etched T mark, numbers and American Flag.250” take-down pin holes (Industry standard)Accepts standard AR15/M16 components Quality made in the Tacoma WA, U.S.A Ph: 253-691-6636 ..
$69.99
CNC machined from 7075-T6 Billet1913 picatiny rail and a type III class 2 hard coat anodized finishMade 100% in the U.S.A. using the highest quality aluminum and 5 Axis CnC machines availableBillet uppers are much stronger than a conventional forged upper with extra strength and high stress points reinforced designed to withstand even the most punishing abuseAlong with extensive testing that was done past the point of failure of a conventional forged upper where this billet upper withstood the failure point and surpassed it by 12x the heat and stress testing..
$139.99
High quality and lightweight stripped Upper Receiver (does not include upper parts) Material: Aircraft grade Aluminum Finish: Cerakote Bright PurpleMADE IN U.S.A..
$119.99
High quality and lightweight stripped Upper Receiver (does not include upper parts) Material: Aircraft grade Aluminum Finish: Cerakote Burnt Bronze MADE IN U.S.A..
$119.99
High quality and lightweight stripped Upper Receiver (does not include upper parts) Material: Aircraft grade Aluminum MADE IN U.S.AFinish: Cerakote FDE..
$119.99
Black AnodizedDry Film LubeT-MarkingsM4 Feed RampsAMERICAN MADEColor may vary slightly from picture posted.* BLEMISHES THAT DO NOT AFFECT FUNCTION OF CHARGING HANDLE CONSISTING AND NOT LIMITED TO SLIGHT VARIATION IN THE FINISH AND COLOR. BLEMISHED ITEMS ARE SOLD AS IS...
$49.99
High quality and lightweight stripped Upper Receiver (does not include upper parts) Material: Aircraft grade Aluminum Finish: Cerakote OD-GREENMADE IN U.S.A..
$119.99
KAK INDUSTRIES SHOCKWAVE BLADE PISTOL STABILIZER - BLACKFeatures:– Fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter)—AR pattern, Glock, CZ Scorpion Evo 3, HK9X pattern, etc.– Available in black and flat dark earth (this listing is for black)– Quick and easy to install– Provides additional support during firing– Weighs a scant 5.0 ounces– ATF approved for pistol use– Veteran designed, engineered, marketed, and sold– Made in U.S.A."Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation."..
$37.99
Features:– Weighs at 5.0 ounces– ATF approved for pistol use"Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation."-Made in U.S.A Color may vary slightly from picture posted...
$39.99
Features:– Weighs at 5.0 ounces – ATF approved for pistol use "Shockwave is proud to introduce the patent-pending Blade pistol stabilizer. Made from high-strength glass-reinforced polymer, the Blade is manufactured to exacting tolerances and fits all pistols equipped with a standard AR-15 pistol buffer tube (up to 1.25″ in diameter). No special receiver extension needed. No half-hour installation process. Just slip it on and tighten the large set screw for a rock-solid installation."Color may vary slightly from picture posted. ..
$39.99
Fits Mil-Peck buffer tubeWeight: 8.3 ozFortified glass and rubber polymer fibersComfortable rubber recoil butt-pad( QD NOT INCLUDED) ..
$39.99
Fits 6-position Receiver Extension Tube - Black Molded from Reinforced Plastic CompositeMounts on Standard Commercial 5.56 / .223 Carbine TubesFriction Locking MechanismIntegrated Ambidextrous QD Swivel SystemHigh-impact polymer carbine buttstock is designed for quick and easy adjustment with multiple sling attachment options for your .223 or 5.56 hunting rifle..
$25.99
Fits 6-position Receiver Extension Tube - Black Molded from Reinforced Plastic CompositeFriction Locking MechanismIntegrated Ambidextrous QD Swivel SystemHigh-impact polymer carbine buttstock is designed for quick and easy adjustment with multiple sling attachment options..
$34.99 $27.99
Full Polymer High Impact Construction Collapsible Mil-Spec Stock6 Position Collapsible StockHigh Impact to prevent cracks and damagesFree Quick Detach SwivelNon-Slip TextureColor: Flat Dark EarthColor may vary slightly from picture posted..
$29.99
AR Mil-Speck 6 Position Butt Stock With QD Attachment Sling Swivel Fits 6-position Mil-spec Receiver Extension Tube - Black Molded from Reinforced Plastic Composite Friction locking mechanism integrated ambidextrous QD swivel system This durable, high-impact polymer carbine buttstock is designed for quick and easy adjustment with multiple sling attachment options.Will not fit commercial size buffer extensionsAR Stock ButtpadReduces the weapon's felt recoil while adhering the stock to the shoulder for better control.Deluxe Combat Style Butt Pad with Ergonomic Design Slip-on Sleeve Design with Lip Re-enforcement for a Perfect Fit.Length: 5.7" Width: 2"Thickness: 1"Weight: 3.6 oz..
$33.99
Wide cheek welds for added comfort and stability Attached rubber buttplateMil Spec(This stock will not fit on a commercial tube)..
$29.99
Rogers Super-Stoc Deluxe AR-15 Collapsible Stock- Flat Dark Earth - Made in U.S.A.The Rogers Super-Stoc Deluxe rifle stock “RSS” is the ultimate refinement in AR/M4 stock technology.The patented cam-lock system completely removes any slop or play inherent with collapsible stocks. Once the desired stock position has been selected, the stock can be locked down solid simply by depressing the cam-lock lever upward. Pressing the quick-release lever will disengage both the cam-lock, and detent pin, allowing you to quickly readjust the stock position.Comes with removable recoil pad and Quick Detach port installed (QD swivel not included).Fits: Mil-Spec Buffer TubesMaterial: Glass-filled and non-glass-filled Nylon blendsLength: 6.75"Width: 5"Weight: 7.3 oz.Color may vary slightly from picture posted...
$54.99 $39.99
Rogers Super-Stoc Deluxe AR-15 Collapsible Stock - Made in U.S.A.The Rogers Super-Stoc Deluxe rifle stock “RSS” is the ultimate refinement in AR/M4 stock technology.The patented cam-lock system completely removes any slop or play inherent with collapsible stocks. Once the desired stock position has been selected, the stock can be locked down solid simply by depressing the cam-lock lever upward. Pressing the quick-release lever will disengage both the cam-lock, and detent pin, allowing you to quickly readjust the stock position.Comes with removable recoil pad and Quick Detach port installed (QD swivel not included). Fits: Mil-Spec Buffer Tubes Material: Glass-filled and non-glass-filled Nylon blends Length: 6.75" Width: 5" Weight: 7.3 oz...
$54.99 $39.99
The Rogers Super-Stoc Deluxe rifle stock “RSS” is the ultimate refinement in AR/M4 stock technology.The patented cam-lock system completely removes any slop or play inherent with collapsible stocks. Once the desired stock position has been selected, the stock can be locked down solid simply by depressing the cam-lock lever upward. Pressing the quick-release lever will disengage both the cam-lock, and detent pin, allowing you to quickly readjust the stock position.Comes with removable recoil pad and Quick Detach port installed (QD swivel not included).Fits: Mil-Spec Buffer TubesMaterial: Glass-filled and non-glass-filled Nylon blendsLength: 6.75"Width: 5"Weight: 7.3 oz.Made in USA!..
$59.99 $44.99
Magpul SL Stock:The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes.SPECIFICATIONSMOE SL Carbine Stock, Mil-SpecWeight: 9.6 oz.Weight, w/receiver extension: 13.6 oz.Length, max: 7.2 in.LOP Adjustment Range: 3.3 in.LOP, M4 Collapsed: ~11.1 in.LOP, M4 Extended: ~14.4 in.USA MADE..
$58.99
Magpul SL Stock:The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes.SPECIFICATIONSMOE SL Carbine Stock, Mil-SpecWeight: 9.6 oz.Weight, w/receiver extension: 13.6 oz.Length, max: 7.2 in.LOP Adjustment Range: 3.3 in.LOP, M4 Collapsed: ~11.1 in.LOP, M4 Extended: ~14.4 in.USA MADE..
$58.95
Magpul SL Stock:The MOE SL Stock – Mil-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using mil-spec sized receiver extension tubes.SPECIFICATIONSMOE SL Carbine Stock, Mil-SpecWeight: 9.6 oz.Weight, w/receiver extension: 13.6 oz.Length, max: 7.2 in.LOP Adjustment Range: 3.3 in.LOP, M4 Collapsed: ~11.1 in.LOP, M4 Extended: ~14.4 in.USA MADE..
$58.95
AR Collapsible Commercial Carbine StockMaterial: Molded from Reinforced Plastic CompositeFinish: Matte BlackDesigned for Commercial-Spec 6-Position Buffer TubesMetal Sling Loop/Attachment installed..
$25.99
Collapsible Mil-Spec Carbine StockMaterial: Molded from Reinforced Plastic CompositeFinish: Matte BlackDesigned for Mil-Spec 6-Position Buffer TubesMetal Sling Loop/Attachment installed..
$19.99 $16.99
AR-15 M4 Blackhawk Knoxx Collapsible Mil-Spec StockMil-Spec Adjustable/Collapsible Carbine ButtstockMade in the U.S.Material: Reinforced PolymerFinish: Matte BlackQuick Detach (QD) Sling Swivel not included..
$28.99 $19.99
Light weight stock to mount to a rifle (A2 round standard tube)- This is our skullaton fixed stock.First all .223 and most .308 AR style riflesSuper strong glass filled NylonComes with A2 buttstock screw to connect to A2 standard buffer tubeIncorporates castle nun and lock ring in designErgonomicTHIS MODEL WILL NOT FIT ON COLLAPSIBLE 6 POSITION STOCK, ONLY ON A1 OR A2 RIFLE BUFFER TUBES ..
$63.99
Fully adjustable butt-stock assembly to mount to a rifle (A2 Round Standard Tube)- This model has a fixed stock Additional 1” height on cheek rest Additional 1 1/16” length of pull with extended length butt-plate Approximately half the weight of competitors’’ adjustable stock The “MBA” weighs just 1.26lbs. Fits all .223 and most .308 style rifles Super strong glass filled nylon Comes with A1 Butt-stock screw to connect to A2 standard buffer tube Incorporates castle nut and lock ring in the design Fully ambidextrous and can be comfortably used shooting off either shoulder ..
$164.99
Hera CQR Featureless Stock The Hera CQR Buttstock allows you to remove the bullet button from your AR15/M4* and go back to the normal magazine release button due to it being a featureless stock.HERA CQR buttstock in Black Weights 2lbsUses standard 6 position buffer tube ( NO SPECIAL BUFFER TUBE NEEDED)Already installed 0.5 inch spacer that could be customized to operator needs. Stock has a 8 slot picatinny rail in the stock for precision shooting (Shipped out with rail cover)Features 2 QD Ports and 3 sling loops (NO QD INCLUDED)Made in GermanyCalifornia Penal Code Section 12276.1(a) Notwithstanding Section 12276, "assault weapon" shall also mean any of the following: (1) a semiautomatic, centerfire rifle that has the capacity to accept a detachable magazine and any one of the following: (a) pistol grip that protrudes conspicuously beneath the action of the weapon.(b) thumbhole stock. (c) folding or telescoping stock (d) grenade launcher or flare launc..
$148.99
**Under California State Law AB 857: 80% Lower Receivers will not be shipped to California Residents (separate or in kits)Hera CQR Featureless Stock The Hera CQR Buttstock allows you to remove the bullet button from your AR15/M4* and go back to the normal magazine release button due to it being a featureless stock.HERA CQR buttstock in Black Weights 2lbsUses standard 6 position buffer tube (already installed)Already installed 0.5 inch spacer that could be customized to operator needs. Stock has a 8 slot picatinny rail in the stock for precision shooting (Shipped out with rail cover)Features 2 QD Ports and 3 sling loops Made in GermanyCalifornia Penal Code Section 12276.1(a) Notwithstanding Section 12276, "assault weapon" shall also mean any of the following: (1) a semiautomatic, centerfire rifle that has the capacity to accept a detachable magazine and any one of the following: (a) pistol grip that protrudes conspicuously beneath the action of the ..
$249.99
SURVIVAL SYSTEM Easy to install!Installs on any Mil-Spec buffer tubeEasy to remove! Shooting an out of state match? No problem, a few seconds with an Allen wrench will allow you to re-install your collapsible stock without disassembly of your rifleErgonomic feel! Our combination features, such as our comfortable comb and adjustable length of pull makes this “featureless” stock truly shooter friendly by allowing the shooter to tailor the rifle to his or her needs. The wide comb provides a match rifle worthy cheek weld.Adaptability! Two sling mounting points, including an ambidextrous OD socket, make this stock adaptable to any use.Spacer adjustable length of pull (3spacers are included)Wide comb for a comfortable and secure cheek weld..
$137.99
Feather Weight Buttstock for Mil Spec Buffer Tube AssembliesPrecision CNC from billet aircraft grade aluminumHardcoat anodized blackQD sling swivel socketMIL-SPEC carbine length and A5 buffer tube compatibleWeight: 2.6 oz with steel screwwith: Foam Pad For AR-15 Stock Buffer Tube - 5.4"..
$62.99
BCA 7.5" .223 WYLDE Pistol Length Barrel | Made In U.S.AManufacture: BEAR CREEK ARSENALAR-15 | .223 WYLDEMade in the USAFinish: ParkerizedTwist: 1/7Gas Block Diameter: .750"1/2"x28 Thread PitchMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress Relieved..
$109.99
Manufacture: BEAR CREEK ARSENALAR-15 | .223 WYLDEMade in the U.S.AFinish: Stainless SteelMaterial: 416R Stainless Twist: 1/7Gas Block Diameter: .750"1/2"x28 Thread PitchMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress Relieved..
$109.99
Length: 7.5" Pistol AR-15 // 5.56 NATO1:7 Twist .750" Diameter Gas block with 0.07 gas hole 1/2x28 Thread Pitch 4150 Chrome Moly Vanadium Finish: MeloniteMade in U.S.A..
$109.99
BCA 10" 7.62X39 Barrel | Made In U.S.A 10" Finish: ParkerizedTwist: 1/107.62x39Gas Block Diameter: .750"5/8"x24 Thread PitchMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress RelievedMade in the U.S.A..
$119.99
AR-15Finish: MeloniteTwist: 1/10Gas Block Diameter: .750"Carbine Length Gas System5/8"x24 Thread PitchMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress RelievedWeight: 1.7lbs (27.2 oz)Made in USA ..
$129.99
Length: 10.5" AR-15 / 5.56 1:7 Twist .750" Diameter Gas Block with 0.07 gas hole 1/2x28 Thread Pitch 4150 Chrome Moly Vanadium Finish: ParkerizedMade in U.S.A. ..
$109.99
Please refer to your local state law before purchasing Length: 10.5”Chambered: AR-15 | .300 BLK (AAC Blackout)1:7 Twist.750” gas block diameterCarbine length with enhanced gas port hole diameter.5/8”X24 Tread Pitch4140 gun quality steel, heat tread to RC 28-32 hardness, stress relievedParkerized finishMADE IN THE U.S.A ..
$119.99 $119.99
Manufacture: Bear Creek Arsenal Length: 14”.223 Wylde1:8 Twist Rate.750” gas block diameterPistol length gas system½”x28 Thread Pitch4140 gun quality steel, heat treated to RC 28-32 hardness, stress relievedFinish: ParkerizedMade in the U.S.A..
$119.99
BCA 16" 5.56 Nato Socom Barrel | Made in U.S.AMaterial: 4150 Heat Treated SteelChamber: 5.56/.223Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: Mid lengthThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN USA ..
$119.99 $109.99
Manufacture: Bear Creek ArsenalLength: 16”Material: 416R stainless steelThread Pitch: 1/2x28Gas Type: CarbineTwist: 1:7Chambered: 5.56Made in the USA..
$109.99
Manufacture: Bear Creek Arsenal Length: 16”Chambered: .300 BLK (AAC Blackout)1:7 Twist.750” gas block diameterCarbine length with enhanced gas port hole diameter.5/8”X24 Tread Pitch4140 gun quality steel, heat threaded to RC 28-32 hardness, stress relievedFinish: Parkerized This barrel carries the same thread pitch as the AR-10 barrels 5/8x24 to add a muzzle device..
$119.99
Manufacture: Bear Creek ArsenalLength: 16”Material: 416R stainless steelThread Pitch: 1/2x28Gas Type: CarbineTwist: 1:8Chambered: .223 Wylde (compatible with .223 and 5.56)Feed ramps: M4Made in the USA..
$109.99
Barrel Detail:Length: 16”Material: 416R stainless steelThread Pitch: 1/2x28Gas Type: CarbineTwist: 1:8Chambered: 5.56 NATOFeed ramps: M4This barrel is safe to shoot .223 and 5.56, but can provide a better grouping with the military pressured 5.56Made in the USA..
$159.99 $119.99
Manufacture: Bear Creek Arsenal Length: 16” Chamber: .223 Wylde 1:8 Twist Rate .750” gas block diameter Carbine length gas system ½”x28 Tread Pitch 4140 gun quality steel, heat treated to RC 28-32 hardness, stress relieved Finish: Parkerized Made in the U.S.A..
$139.99 $119.99
Manufacture: Bear Creek Arsenal CNC Precision Machined 4150 Heat Treated SteelDurable Black Nitride FinishGas System: Carbine5.56 NATOM4 Contour 1:8 Twist rate1/x28 ThreadedMade in the USA ..
$129.99
BCA 16" 5.56 Nato Rifle Barrel | Parkerized | Made In U.S.A Manufacture: BEAR CREEK ARSENALMaterial: 4150 Heat Treated SteelChamber: AR-15 | 5.56 NATO Length: 16"Twist Rate: 1:8Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: ParkerizedMADE IN U.S.A..
$159.99 $119.99
Manufacture: Bear Creek Arsenal Chamber: 5.56Length: 16"Twist Rate: 1:9Gas Port: 0.750"Gas System: CarbineThread Pitch: 1/2x28Feed Ramps: M4Finish: Parkerized**MADE IN USA**..
$125.99
Manufacture: Bear Creek Arsenal Length: 16”Chamber: .223 Wylde1:9 Twist Rate.750” gas block diameterCarbine length gas system½”x28 Tread Pitch4140 gun quality steel, heat treated to RC 28-32 hardness, stress relievedFinish: NitrideWeight: 1.13 lbs (18.08 oz) Made in the U.S.A..
$109.99
16" 5.56 Nato Match Grade 1:8 Twist Rifle Barrel | Made in U.S.A CNC Precision Machined 4150 Heat Treated SteelDurable Black Nitride FinishGas Port: 0.750''Gas System: CarbineM4 Contour 1:8 Twist rate1/2x28 ThreadedMade in USA..
$129.99
Manufacture: Bear Creek ArsenalFinish: ParkerizedTwist: 1/10Gas Block Diameter: .750"Carbine Length with a gas hole diameter of 0.1025/8"x24 Thread PitchMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress RelievedMade in the USA..
$125.99
7.62x39 Rifle BarrelFinish: MeloniteTwist: 1/9.5Gas Block Diameter: .750"Carbine Length with Gas SystemMaterial: 4140 Gun Quality Steel, Heat Treated to RC 28-32 Hardness, Stress RelievedMade in U.S.A..
$119.99
Manufacture: Bear Creek ArsenalLength: 18 Inch Chambered in .223 Wylde Can shoot .223/5.561:8 Twist rate .750" Gas block diameterMid Length gas system 1/2x28" thread pitch 4150 Chrome Moly Vanadium Finish: Black Nitride Spiral FlutesMade In U.S.A..
$109.99
16" 5.56 Nato Match Grade 1:8 Twist Rifle Barrel | Made in U.S.A CNC Precision Machined 4150 Heat Treated SteelDurable Black Nitride FinishGas Block System: 0.750M4 Contour 1:8 Twist rate1/2x28 ThreadedMade in USACerakote BLACK Multi Ported Compensator Upsilon Muzzle BrakeCNC Machined High Quality Steel Heat Treated Multi Ported Design Solid Machined Construction Tuned ported on top to reduce muzzle rise Ported bottom to dissipate the gas quicker 1/2"x28 Thread Pitch Weight: 2.2 oz Length: 2" Approx Finish: Black Cerakote..
$129.99
Features:Manufacture: Bushmaster Firearms Length: 16 InchesCaliber: 5.56 NATOTwist: 1:9Profile: Pencil Barrel 0.625Material: 4150 Chrome Molly Vanadium SteelGas System: CarbineBFI Engraved Bottom of MuzzleFinish: Black OxidePre Installed: Barrel nut, End Cap and Flat Top Gas Block with Bayonet Lug ..
$159.99 $119.99
AR-15 Angle Cut Clamp on M-LOK Handguard | Made in USAAccepts M-LOK accessory rails Clamp On StyleUSA Made Steel barrel nut included LENGTH: 7 / 10 / 12 / 15 TOP RAIL LENGTH: 6.75 / 9.75 / 11.75 / 14.753 Fasteners Angled Cut Design 2 M-LOK rails included 223/556Anodized Finish ..
$89.99 $74.99
M-LOK Slots Matte Black Finish Total Weight: 4" -7.2 OZ7" - 8.9 OZ 10"- 10.5 OZ 12" - 11.7 OZ 15" - 13.5 OZ Anti Rotation TabsAircraft- Grade AluminumOne Piece Free Float Design Full Length Picatinny Top Rail Super Slim Light Weight Design..
$49.99
Material: Aircraft grade 6061 aluminum/lockingLength: 4", 7", 10”, 12”, 15”Keymod location: 3, 6, 9, 12 o’clock locationTop rail has full complete pica-tinny rail. Finish: Black anodized Barrel nut material: SteelClamp on design with proprietary screw to lock on the rail to the barrel nut. Spanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separately..
$64.99 $51.99
Available in 7'',10",12",15"Color: BlackMaterial: 6061 AluminumMonolithic Top RailWill Accommodate 99.9% of all micro low profile gas blocksUltra Lightweight but Heavy Duty DesignBarrel Nut- (Maximum Inside Dimensions of Barrel Nut is 1″)Barrel nut is intended for .223/5.56 300 blackout etc… RiflesRail will not Fit .308 Caliber Rifles..
$49.99
Material: Aircraft grade 6061 aluminum Length options: 7",10",12",15" Weight: 10" 10.1 oz / 12" 11.3 oz Internal diameter: 1.33 Wide, 1.65 High Finish: Black hard coat type 3 anodizedSteel barrel nut included 6 screw fasteners design with proprietary screw for easy installation Spanner wrench needed to torque barrel nut to spec (not included) hex wrench ..
$44.99
6061 Aluminum Super Slim Design Black Anodized Keymod Steel Barrel Nut Included Lightweight (9.6-10.7 OZ) Free Float ..
$49.99
Constructed of 6061 AluminumPre-Drilled Steel Barrel NutFits any AR-15 upper receiver2 x 2 inch length detachable Rails IncludedLightweightMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"..
$49.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote BRIGHT PURPLEBarrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyColor may vary slightly from picture posted...
$69.99
6061 AluminumKEYMOD HANDGUARDLength: 7" / 10" / 12" / 15"Pre-Drilled Steel Barrel NutFits any AR-15 upper receiverMonolithic top rail is continuous with flat top receiver1913 Picatinny rail topThe Rail will feature standard Rail slots at the 3 6 and 9 o "clock positions.Removable rail SystemSectional Rails Can Be Moved To Different Positionsoutside Diameter: 1.536"(without Rail)inside Diameter: 1.38" (without Rail)Height : 1.98"..
$49.99
15" Accepts Keymod accessory rails Clamp On StyleUSA Made Steel barrel nut included 3 Fasteners Angled Cut Design 2 Keymod rails included Anodized ..
$65.99
Accepts Keymod accessory rails Clamp On StyleUS Made Steel barrel nut included 3 Fasteners Angled Cut Design Finish: Cerakote FDE..
$119.99 $89.99
Accepts Keymod accessory rails Clamp On StyleUSA Made Steel barrel nut included 3 Fasteners Angled Cut Design 223/556Finish: Cerakote OD-GREEN..
$119.99 $89.99
Accepts M-LOK accessory rails Clamp On StyleUSA Made Steel barrel nut included LENGTH: 15 TOP RAIL LENGTH: 14.753 Fasteners Angled Cut Design 2 M-LOK rails included 223/556Anodized Finish ..
$64.99
Free float battle rail with CNC Precision and minimal barrel nut exposure Features:Length Option: 10" / 12" [OUT OF STOCK] / 15" CNC Machined Steel Barrel Nut Keymod rail cut-outs in the 3, 6 and 9 a clock CNC machined out of a chunk of 6061 aluminum 3 hex screws on the bottom to clasp on to the knurled barrel nut to produce a strong hold This rail is finished off with a Mil-spec Type III hard coat anodizing providing great weather resistance and durable top coat. Inside Diameter: 1.31"Package includes:2 x 3” Keymod Rail with screws and hex wrench..
$55.99
Ultra Lightweight Frame Rail SystemMaterial: Aircraft grade 6061 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Black Hard-coat type III Anodized Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationInside Diameter: 1.35"Spanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separately &l..
$68.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote ODGBarrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyColor may vary slightly from picture posted...
$84.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote REDBarrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyColor may vary slightly from picture posted. ..
$84.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Sig Pink Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyColor may vary slightly from picture posted...
$84.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Robins EggBarrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchColor may vary slightly from picture posted.This rail does not come with keymod section, sold separately ..
$84.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10”, 12”, 15”Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock location Top rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Flat Dark Earth Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separatelyColor may vary slightly from picture posted. ..
$84.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 10” / 12" Internal diameter: 1.35” width 1.67 heightKeymod location: 3, 6, 9, 12 o’clock locationTop rail has 4 slots or (1.78”) section of pica-tinny on the beginning and end of rail, the rest of the rail is skeleton cut with keymod section for perfect customization.Finish: Cerakote Burnt Bronze Barrel nut material: SteelClamp on design with proprietary screw and locking washer for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail does not come with keymod section, sold separately..
$84.99
Material: Aircraft grade 6061 aluminumLength: 10”, 12”, 15”Internal diameter: 1.39” width 1.67 heightOnly 10” M-LOK location: 5 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 2 M-LOK sectionsOnly 10” Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the end of rail, the rest of the rail is skeleton cut with 2 M-LOK section for perfect customization.Finish: Black Hard-coat type III AnodizedBarrel nut material: Steel6 screw fasteners design with proprietary screw for easy installationInside Diameter: 1.39"Spanner wrench needed to torque barrel nut to spec (not included) and hex wrenchOptional Sizes and Dimensions10” : M-LOK location: 5 M-LOK sections of 1.26” at3, 6, 9, 12 o’clock location has only 2 M-LOK sections/ Top rail has 7 slots or (2.9”) section of pica-tinny on the beginning and 6 or (2.45”)slots at the end of rail, the rest of the rail is skeleton cut with 2 M-LOK section for perfect customization.12”..
$61.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 12”Internal diameter: 1.38” width 1.66 heightM-LOK location: 3, 6, 9 o’clock location Top rail has 6 slots or (2.47”) section of pica-tinny on the beginning and (2.86") or 7 slots end of rail, the rest of the rail is skeleton cut with M-LOK section for perfect customization.Finish: Cerakote FDEBarrel nut material: SteelProprietary screw to fasten the handguard to the barrel nut for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail system does come with two 1.5" (3slot) pica-tiny M-LOK rails Includes shims for proper timing. Color may vary slightly from pict..
$74.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 12”Internal diameter: 1.38” width 1.66 heightM-LOK location: 3, 6, 9 o’clock location Top rail has 6 slots or (2.47”) section of pica-tinny on the beginning and (2.86") or 7 slots end of rail, the rest of the rail is skeleton cut with M-LOK section for perfect customization.Finish: Cerakote REDBarrel nut material: SteelProprietary screw to fasten the handguard to the barrel nut for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail system does come with two 1.5" (3slot) pica-tiny M-LOK ra..
$74.99
Material: Aircraft grade 6061-T6 aluminum/lockingLength: 12”Internal diameter: 1.38” width 1.66 heightM-LOK location: 3, 6, 9 o’clock location Top rail has 6 slots or (2.47”) section of pica-tinny on the beginning and (2.86") or 7 slots end of rail, the rest of the rail is skeleton cut with M-LOK section for perfect customization.Finish: Cerakote PINKBarrel nut material: SteelProprietary screw to fasten the handguard to the barrel nut for easy installationSpanner wrench needed to torque barrel nut to spec (not included) and hex wrenchThis rail system does come with two 1.5" (3slot) pica-tiny M-LOK rails Includes shims for proper timing. Color may vary slightly from picture posted. ..
$74.99
The Magpul MOE M-LOK Hand Guard (Magpul Original Equipment) for AR15/M4 firearms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. Designed with versatility in mind, M-LOK slots at the two, six, and ten o'clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional operator protection from hot front sight assembly. FEATURES Replaces standard M4 Carbine-type plastic hand guardsCompatible with most piston-driven as well as 'direct impingement' gas systemsEasy to install utilizing existing delta ring and round or triangular front hand guard retaining capM-LOK slots at the two, six, and ten o'clock pos..
$28.95
AR-15 / M4 QUAD RAIL HANDGUARD OVAL PORTS 6.5"T6 6061 Aircraft AluminumBead Blast with Type III AnodizingPrecise CNC machiningMil Spec 1913 Picatinny2 Piece Drop In Rail SystemOVAL PortsWeight: 11 oz // Package Weight: 12.4 ozDrop-in Rail Systems guarantee precise fitment with your Mil Spec Standard AR M4 upper receiver..
$27.99
AR-15 Angle Cut Clamp On Keymod Handguard | Made In USA4" / Top Rail Length 3.5" 9" / Top Rail Length 8.75" Accepts Keymod accessory rails Clamp On StyleUSA Made Steel barrel nut included 3 Fasteners Angled Cut Design 223/556Finish: Black Anodized ..
$81.99 $64.99
Solid 6061 Aircraft Aluminum Construction with Hard AnodizingCNC Precision MachinedPicatinny/Weaver Rail TypeExtended Top Rail Provides "NO-GAP" InstallationInside Diameter: 1.74"Length 07", 10", 12" and 16"..
$64.99 $51.99
-50x50.jpg "AR-15 ''SAFEGUARD'' Carbine Kit")
-50x50.jpg "AR-15 ''STANDARD'' Carbine Kit")
-50x50.jpg "AR-15 ''STANDARD'' Pistol Kit")
-50x50.jpg "AR-15 ''HORUS'' Carbine Kit")
-50x50.jpg "►►AR-15 ''HORUS SIDE CHARGING EDITION'' Carbine Kit")
-50x50.jpg "AR-15 ''RIGHTEOUS'' Pistol Kit")
-50x50.jpg "►►AR-15 ''RIGHTEOUS SIDE CHARGING EDITION'' Pistol Kit")
-50x50.jpg "AR-15 ''CYCLONE'' Pistol Kit")
-250x250.jpg "USA Made .223/5.56 LIGHTWEIGHT Bolt Carrier Group - Black Nitride")
 (1)-250x250.jpg "USA Made .223/5.56/300 BLK Bolt Carrier Group - Nitride")
-250x250.jpg "USA Made .223/5.56/300 BLK Nickel Boron Bolt Carrier Group - NIB")
 (1)-250x250.jpg "USA Made .223/5.56/300 BLK Bolt Carrier Group- Diamond (DLC)")
-250x250.jpg "AR-15 .223/5.56 Bolt Carrier Group- Black Nitride -With Ambidextrous Charging Handle")
-250x250.jpg "USA Made .223/5.56/300 BLK Nickel Boron Bolt Carrier Group - NiB And Dual Ambidextrous Charging Handle")
 w Ambidextrous Charging Handle (1)-250x250.jpg "USA Made .223/5.56/300BLK Bolt Carrier Group- Diamond (DLC) W/ Ambidextrous Steel Latch Charging Handle")
 w Talon Tactical Charging Handle (1)-250x250.jpg "USA Made .223/5.56/300BLK Bolt Carrier Group- Diamond (DLC) W/ Talon Tactical Charging Handle")
 - Made in U.S.A (2)-250x250.jpg "AR-15 Mil-Spec Upper Receiver - Made In U.S.A")
-250x250.jpg "Anderson Manufacturing AR-15 Stripped Upper Receiver | Made in U.S.A")
-250x250.jpg "AR-15 Black Anodized Billet Upper Receiver | Made in U.S.A")
-250x250.jpg "AR-15 Raw Billet Upper Receiver | Made In U.S.A")
-250x250.jpg "AR-15 Mil-Spec Upper Receiver-Made In U.S.A.-ODS")
-250x250.jpg "AR-15 Mil-Spec Upper Receiver - Bullet Stamped")
-250x250.jpg "AR-15 High Quality Billet Upper Receiver - 7075 T6 Aluminum")
-250x250.jpg "Cerakote Bright Purple | AR-15 Mil-Spec Upper Receiver -Made In U.S.A.")
-250x250.jpg "Cerakote Burnt Bronze | AR-15 Mil-Spec Upper Receiver -Made in U.S.A")
-250x250.jpg "Cerakote FDE | AR-15 Mil-Spec Upper Receiver | Made In U.S.A.")
-250x250.jpg "Cerakote OD-Green |AR-15 Mil-Spec Upper Receiver -Made In U.S.A.")
![KAK Industries - Shockwave Blade Pistol Stabilizer - Black [Made In U.S.A]](https://outdoorsportsusa.com/image/cache/catalog/demo/ST-SW/KAK Industries - Shockwave Blade Pistol Stabilizer - Black (4)-250x250.jpg "KAK Industries - Shockwave Blade Pistol Stabilizer - Black [Made In U.S.A]")
-250x250.jpg "KAK Industries Shockwave Blade Pistol Stabilizer- OD Green")
-250x250.jpg "KAK Industries Shockwave Blade Pistol Stabilizer- FDE- Flat Dark Earth")
-250x250.jpg "Alpha Stock")
-250x250.jpg "AR-15 .223 5.56 Commercial 6 Position Butt Stock With QD Attachment Sling Swivel")
-250x250.jpg "AR Mil Spec 6 Position Butt Stock With QD Attachment Sling Swivel")
-250x250.jpg "AR-15 Adjustable High Impact Construction Mil-Spec | FDE")
-250x250.jpg "AR Mil Spec 6 Position Butt Stock With QD Attachment Sling Swivel & Stock Buttpad")
-250x250.jpg "AR-15 | AR-10 Mil-Spec Sopmod Carbine Stock")
-Flat Dark Earth - Made in U.S.A (1)-250x250.jpg "Rogers Super-Stoc Deluxe AR Collapsible Stock (W/ QD Port)-Flat Dark Earth - Made In U.S.A")
 - Made in U.S.A (1)-250x250.jpg "Rogers Super-Stoc Deluxe AR Collapsible Stock (W/QD Port) | Made In U.S.A.")
-250x250.jpg "Rogers Super-Stoc Deluxe AR-15 Collapsible Stock W/ QD Swivel - Made In U.S.A")
-250x250.jpg "MOE SL™ Carbine Stock Mil-Spec | Made In U.S.A")
-250x250.jpg "MAGPUL MOE SL™ Carbine Stock Mil-Spec| FDE | Made In U.S.A")
-250x250.jpg "MOE SL™ Carbine Stock Mil-Spec | Made In U.S.A |OD-Green")
-250x250.jpg "AR-15 | AR-10 Collapsible Commercial Carbine Stock")
-250x250.jpg "AR-15 | AR-10 Collapsible Mil-Spec Carbine Stock")
-250x250.jpg "AR Blackhawk Mil Spec Butt Stock | Made In U.S.A")
-250x250.jpg "Skullaton MBA-2 Rifle Buttstock LUTH-AR")
-250x250.jpg "MBA-1 Luth-AR Stock")
-250x250.jpg "AR-15 Hera CQR Featureless Stock")
-250x250.jpg "AR-15 CQR Featureless Stock and 80 Percent Billet Lower |Made In Germany")
-250x250.jpg "AR-15 Featureless Survival System")
-250x250.jpg "Feather Weight Buttstock for Mil Spec Buffer Tube Assemblies W/ Foam Pad")
-250x250.jpg "BCA 7.5\" .223 WYLDE Pistol Length Barrel | Made In U.S.A")
-250x250.jpg "BCA 7.5\" .223 WYLDE Stainless Steel Barrel | Made In U.S.A.")
-250x250.jpg "7.5\" 5.56 Nato Pistol Length Barrel | Melonite | Made In U.S.A")
-250x250.jpg "10\" 7.62X39 Barrel | Melonite Finish | Made In U.S.A")
-250x250.jpg "10.5\" 5.56 Pistol Barrel With Carbine Gas System | Made In U.S.A")
-250x250.jpg "BCA 10.5\" 300 AAC Blackout Barrel | Parkerized |Made in U.S.A")
-250x250.jpg "BCA 14\" .223 Wylde Barrel | Made in U.S.A")
-250x250.jpg "BCA 16\" 5.56 Nato Stainless Steel Barrel | Made in U.S.A")
-250x250.jpg "BCA 16\" 300 AAC Blackout | Parkerized | Made in U.S.A.")
-250x250.jpg "BCA 16\" .223 Wylde Stainless Steel Barrel | Made in U.S.A.")
-250x250.jpg "BCA 16\" 5.56 Nato |1:8 Twist | Stainless Steel Barrel | Made in USA")
-250x250.jpg "BCA 16\" .223 WYLDE Barrel | 1:8 Twist | Parkerized | Made In U.S.A")
-250x250.jpg "BCA 16\" 5.56 Nato Match Grade 1:8 Twist Rifle Barrel | Made in U.S.A.")
-250x250.jpg "BCA 16\" 5.56 Nato Rifle Barrel | Parkerized | Made In U.S.A")
-250x250.jpg "BCA 16\" 5.56 Nato 1:9 Twist Rifle Barrel | Parkerized | Made in U.S.A")
-250x250.jpg "BCA 16\" .223 WYLDE Barrel | 1:9 Twist | Nitride | Made In U.S.A")
-250x250.jpg "16\" 5.56 Nato Match Grade 1:8 Twist Rifle Barrel | Made in U.S.A")
-250x250.jpg "BCA 16\" 7.62x39 Rifle Barrel | Parkerized | Made in U.S.A.")
-250x250.jpg "16\" 7.62x39 Rifle Barrel | Melonite | Made in U.S.A")
-250x250.jpg "BCA 18\" .223 Wylde Heavy Barrel W/ Spiral flutes | Made In U.S.A")
 (1)-250x250.jpg "Bushmaster 16\" 5.56 Nato Pencil Barrel Assembly | Made in U.S.A")
-250x250.jpg "AR-15 Angle Cut Clamp on M-LOK Handguard | Made in USA")
-250x250.jpg "AR-15 M-LOK Super Slim Free Float Handguard with Steel Barrel Nut")
-250x250.jpg "AR-15 M-LOK New Design Rail System")
-250x250.jpg "AR-15 Light Weight Keymod Hand Guard")
-250x250.jpg "AR-15 Ultra Slim Keymod Handguards W/Steel Barrel Nut")
-250x250.jpg "Cerakote BRIGHT PURPLE | AR-15 10\" Ultra Light Frame Rail System")
-250x250.jpg "AR-15 Ultra Slim Keymod Handguards V2 W/ Steel Barrel Nut")
-250x250.jpg "AR-15 Angle Cut Clamp on Keymod Handguard | USA MADE")
-250x250.jpg "Cerakote FDE | AR-15 Angle Cut Clamp-on Keymod Handguard | Made In U.S.A.")
-250x250.jpg "Cerakote OD-Green | AR-15 Angle Cut Clamp On Keymod Handguard | Made In U.S.A")
-250x250.jpg "AR-15 Angle Cut Clamp on M-LOK Handguard V2 | Made in USA")
-250x250.jpg "AR-15 Clamp On Free Float Keymod Handguard")
-250x250.jpg "AR-15 Ultra Lightweight Frame Rail System")
-250x250.jpg "Cerakote OD-Green | AR-15 Ultra Light Frame Rail System")
-250x250.jpg "Cerakote Red | AR-15 Ultra Light Frame Rail System")
-250x250.jpg "Cerakote Pink | AR-15 Ultra Light Frame Rail System")
-250x250.jpg "Cerakote Robins Egg | AR-15 Ultra Light Frame Rail System")
-250x250.jpg "Cerakote FDE | AR-15 Ultra Light Frame Rail System")
-250x250.jpg "AR-15 M-LOK Lightweight Frame Rail System")
-250x250.jpg "Cerakote FDE |AR-15 M-LOK Lightweight Frame Rail System 12 Inch")
-250x250.jpg "Cerakote Red | AR-15 M-LOK Lightweight Frame Rail System 12''")
-250x250.jpg "Cerakote Pink |AR-15 M-LOK Lightweight Frame Rail System 12 Inch")
-250x250.jpg "AR-15 Magpul M-LOK Hand Guard Carbine | Made In U.S.A")
-250x250.jpg "AR-15 / M4 Quad Rail Hand Guard Oval Ports 6.5\"")
-250x250.jpg "AR-15 Angle Cut Clamp On Keymod Handguard | Made In USA")
-250x250.jpg "AR-15 Free Float Quad Rail Handguard -Length Option")